E-Flite 10-Amp Pro Brushless ESC

This controller has been designed for use in radio control aircraft and to support constant currents of up to 10 amps when using 2-3 cell Li-Po battery packs and up to 4 sub-micro servos. Standard functions include advance BEC and safe power-arming in addition to programmable functions such as low-voltage cutoff, braking, timing and throttle input range.

Features
As much as 10-amp constant present with appropriate air circulation
Programmable motor braking
Safe power-arm mode prevents unintentional starts
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery beginning voltage
Programmable throttle input range (1.1ms-1.9ms or Vehicle Select)
Vehicle motor shutdown if signal is lost or there is interference
Programmable timing-2 user-selectable ranges for use with a large variety of brushless motors
Pre-wired connectors-JST on battery input and 2mm female gold bullets on motor output leads
Soft start

Specs
Amperage: 20 & Under
Brake: Yes - Programmable
Cells w/BEC: 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd
Continuous Optimum Current: 0 - 25A
Height: 0.4 in (10mm)
Input Connector Types: JST
Length: 1.2 in (30mm)
Brief Peak Current: 12A (15 sec)
Output Connector Types: 20AWG with 2mm female gold bullet connectors
Type: Brushless
Weight: 0.35 oz (10 g)
Width: 0.7 in (17.5mm)