E-Flite 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2)

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a top quality sensorless brushless electronic speed control with an incorporated switch-mode BEC that is extremely lightweight and effective. It can run without the requirement for a separate receiver battery to power your servos and receivers, conserving you weight and issue.

Functions
Up to 40 amps continuous present with proper air flow and 55 amps rupture present (15 seconds)
5A continuous present, 5V Switch-Mode BEC Circuit (Proper cooling and air flow needed)
More powerful BEC for assistance of a lot of 3-axis stabilization systems
Increase to 7 analog or 6 digital standard-sized servos with the BEC on any suggested input voltage
3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
Programmable motor braking
Safe power-arm mode prevents unintentional starts
Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
Programmable throttle input variety (1.1ms???1.9ms or 1.2ms???1.8ms)
Programmable soft start for helis and planes
Auto motor closed down if signal is lost or there is disturbance
Programmable timing???5 user-selectable ranges, use with a large variety of brushless motors

Specifications
Amperage: 40-60
BEC Voltage: 2.5A continuous
Brake: Yes
Constant Optimum Current: 25 - 50A
Height: 0.47 in (12mm)
Input Adapter Types: 13 AWG with E-flite EC3 Adapter
Input Voltage: 3S-6S LiPo or 9- to 18-cell Ni-MH/Ni-Cd
Length: 2.6 in (66mm)
Brief Peak Current: 55A
Output Adapter Types: 16AWG with 3.5mm Female Gold Bullet Connectors
Type: Brushless
Weight: 1.7 oz (48g)
Width: 1.2 in (31mm)