E-Flite 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2)

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a premium sensorless brushless electronic speed control with an integrated switch-mode BEC that is extremely lightweight and effective. It can operate without the requirement for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Functions
Up to 40 amps continuous existing with correct air flow and 55 amps burst existing (15 seconds)
5A continuous existing, 5V Switch-Mode BEC Circuit (Proper cooling and air flow needed)
Stronger BEC for support of a lot of 3-axis stabilization systems
Increase to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
Programmable motor braking
Safe power-arm mode avoids unintentional starts
Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery beginning voltage
Programmable throttle input variety (1.1ms???1.9ms or 1.2ms???1.8ms)
Programmable soft start for helis and airplanes
Auto motor closed down if signal is lost or there is disturbance
Programmable timing???5 user-selectable varieties, utilize with a large variety of brushless motors

Specs
Amperage: 40-60
BEC Voltage: 2.5A constant
Brake: Yes
Constant Optimum Current: 25 - 50A
Height: 0.47 in (12mm)
Input Port Types: 13 AWG with E-flite EC3 Port
Input Voltage: 3S-6S LiPo or 9- to 18-cell Ni-MH/Ni-Cd
Length: 2.6 in (66mm)
Momentary Peak Current: 55A
Output Port Types: 16AWG with 3.5mm Female Gold Bullet Connectors
Type: Brushless
Weight: 1.7 oz (48g)
Width: 1.2 in (31mm)