E-Flite 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2)

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an incorporated switch-mode BEC that is very light-weight and effective. It can run without the need for a separate receiver battery to power your servos and receivers, conserving you weight and problem.

Features
Approximately 40 amps constant current with proper air circulation and 55 amps burst current (15 seconds)
5A constant current, 5V Switch-Mode BEC Circuit (Appropriate cooling and air flow needed)
More powerful BEC for assistance of the majority of 3-axis stabilization systems
Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any suggested input voltage
3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
Programmable motor braking
Safe power-arm mode avoids accidental starts
Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery beginning voltage
Programmable throttle input range (1.1ms???1.9ms or 1.2ms???1.8ms)
Programmable soft start for helis and aircrafts
Car motor closed down if signal is lost or there is disturbance
Programmable timing???5 user-selectable ranges, utilize with a big range of brushless motors

Specs
Amperage: 40-60
BEC Voltage: 2.5A continuous
Brake: Yes
Constant Maximum Current: 25 - 50A
Height: 0.47 in (12mm)
Input Connector Types: 13 AWG with E-flite EC3 Connector
Input Voltage: 3S-6S LiPo or 9- to 18-cell Ni-MH/Ni-Cd
Length: 2.6 in (66mm)
Brief Peak Current: 55A
Output Connector Types: 16AWG with 3.5mm Female Gold Bullet Connectors
Type: Brushless
Weight: 1.7 oz (48g)
Width: 1.2 in (31mm)