E-Flite 70mAh 1S 3.7V 14C LiPo Battery

Requirements


Type: LiPo
Capability|Capability}: 70mAh
Voltage: 3.7V
Connector Type: Ultra Micro
Weight: 0.18 oz (5.1 g)
Length: 1.30 in (33mm)
Width: 0.46 in (11.7mm)
Height: 0.10 in (2.54mm)
Maximum Constant Discharge
: 14C
Maximum Constant Existing
: 1.0A


The below product likewise sets truly well with the product being reviewed.



The fantastic Blade® Scout CX™ heli may just weigh a little over half an ounce (17 grams), but it will have you flying circles around other helis like it. Cutting edge 2.4GHz radio control with advanced Blade engineering and electronics** make it all possible. And it's so simple to fly, you'll be able to do it even if you've never flown prior to.



** The included radio system is not suitable with JR 2.4GHz or Spektrum 2.4GHz systems.

Comprehensive Information

Blade Scout CX Repair Tutorials

Features
Engineered by professionals in RC helicopter efficiency
Advanced 2.4GHz radio control lets numerous helis fly at the same time
Digital Piezo gyro for exceptional directional control and stability
Proportional rotor head servo for smooth, accurate control response
Replacement parts readily available to keep your Scout CX™ heli flying fresh

Needed To Complete
Nothing! Everything you need to get in the air is included in the box, consisting of four AA batteries for the transmitter.

Specs
Approximate Flight Time: 4 minutes
Battery: 3.7V 1ST 70mAh LiPo (included)
Conclusion Level: Ready-to-Fly
Experience Level: Novice
Gross Weight: 0.60 oz (17 g)
Height: 4.13 in (105mm)
Is Assembly Required: No
Length: 6.30 in (160mm)
Main Gear Ratio: 7.86: 1
Main Rotor Blade Length: 3.00 in (76mm)
Main Rotor {Diameter|Size}: 6.50 in (165mm)
Number of Channels: 3
Recommended Environment: Indoor
Rotor Type: Coaxial
Size/Scale: Ultra Micro
Width: 1.57 in (40mm)

Several others have bought this product in addition to the product that you are currently reviewing.

Upper Main Blade Set (1 pair): Scout CX




Right here is one more product that compliments the product being reviewed.

A2212-6 2200Kv Brushless Outrunner Motor, 3.17 mm Shaft, 3.5mm B

Requirements

Cells: 5-7 Nimh 2-3 Lipo
RPM/V: 2200Kv
Max Efficiency: 14-22 A
No Load Existing: 1.4 A
Current Capacity: 28A/60s
Shaft Diameter: 3mm
Weight: 47 g
Dimensions: 27.5mm x 30 mm

Recomended Design Weight: 300-1000g
Recomended Prop; 2s Lipo 7 x 5 - 3s Lipo 5 x 5

Right here is one more product that compliments the product being reviewed.

Lower Main Blade Set (1 pair): Scout CX




Right here is a wonderful product that many others have bought at the very same time.

150mAh 1S 3.7V 45C LiPo Battery

You will certainly like this item if you have the item previously mentioned.

Stabilizer Flybar Set: Scout CX