Fast Eddy Tamiya Tt-02 Chassis Rubber Sealed Bearing Kit

Tamiya TT-02 Chassis Rubber Sealed Bearing Kit

(8) 5x10x4

(4) 5x11x4

(4) 8x12x3.5

The listed below item likewise pairs really well with the item being reviewed.

Rc Subaru Wrx Sti Kit, 1/10 Scale, 4Wd, Brushed, W/ A Tt - 02 Ch

**Extra Technical Info Will Be Added When It Appears.**

This is the 1/10 scale, Tamiya electric powered, radio controlled,
Subaru WRX STI On-Road Race Automobile Kit.

FEATURES:
Chassis: TT-02 ABS resin bath tub type decreases contact with the road
    upright assembly can be changed to give chassis an extra 4mm of
    travel for Rally racing
Drive: Four wheel, shaft driven, with dogbones
Motor: Tamiya Torque Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE02S brushless suitable
Differential: Gear type
Wheels: Nylon construction, 10 spoke 12mm hex, 1.02" (26mm)
    wide 2.00" (51mm) diameter, gun metal gray in color
Tires: Treaded rubber with foam inserts
Suspension: Totally independent double wishbone
Shocks: Plastic body, friction, not oil filled
Body: Clear polycarbonate with plastic side mirrors and rear wing
Camber: Non-adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind lorry
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the cars and truck in relation to the
    chassis
Steering: Bellcrank type
Bumper: Front, urethane

INCLUDES:
Tamiya Subaru WRX STI with 540 Brushed Motor, Tires,
    Wheels, Clear Body, Foam Inserts, ESC, Decals and Recommendations

REQUIRES:
Radio: 2-channel with high speed steering servo
Battery: 7.2V NiMH
Battery Battery charger: To match chosen battery
Structure and track equipment

SPECIFICATIONS:
Automobile-
Wheelbase: 17.4" (441mm)
Length: 18.6" (472mm)
    Body-
Length:
Width:
Height:

REMARKS:
To update to ball bearings order;
    Qty. Size Location Qty Bearing Set
2 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
2 8x12mm Differential 1 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Back Uprights 1 DTXC1535

Want another terrific item to compliment the above pointed out item?



RNR Wander Tires V3 (Hard) 26mm (2)

RNR Wander tires enable easy wandering on asphalt or carpet and drift tires for exceptional drift distances and angles.

Fits: 1/10 R/C touring cars and trucks and drift cars and trucks (HPI, Tamiya, Losi, Yokomo)

Fits 26mm wheels (HPI, Tamiya, Losi, Yokomo)

Specs:

Inner diameter: 50mm (1.9")

Outer diameter: 64mm (2.5")

Width: 26mm (1.02")

Weight: 16.9g

Get this item to enhance the one you are reading around.



RC Audi Quattro A2 Rally Automobile Kit, TT-02 Chassis

The Audi Quattro A2 is an iconic Rally Race Car that made its mark in the 1980's. Tamiya's 1/10 scale radio control replica brings rally racing fun to hobbyists on the adaptable and easy-driving TT-02 chassis.

TT-02: Adaptable, Well Balanced Shaft Driven 4WD

The shaft-driven 4WD TT-02 chassis utilizes a longitudinal design with the battery on the left and the motor on the right, to give excellent stability. In addition, it features similar left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain transmissions. It is an extremely adaptable chassis, as it uses 2 various wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible equipment ratios. It is not short on looks either, with brake disc-shaped wheel centers and elegant front bumper supports.

Note: This is a set and requires a radio system, servo, battery, charger and assembly.

Features:

A2 body is formed properly in durable polycarbonate.

Features metal-plated ABS parts for front and rear light cases, fog lamps.

5-spoke wheels are formed in silver, and paired with racing radial tires.

4-bevel differential gears and 4-wheel double wishbone suspension.

Includes Tamiya Torque Tuned Motor.

Includes Tamiya TBLE-02S ESC (electronic speed control)