Fast Eddy Tamiya Tt-02 Chassis Rubber Sealed Bearing Kit

Tamiya TT-02 Chassis Rubber Sealed Bearing Kit

(8) 5x10x4

(4) 5x11x4

(4) 8x12x3.5

The below item additionally sets actually well with the item being reviewed.

Rc Subaru Wrx Sti Kit, 1/10 Scale, 4Wd, Brushed, W/ A Tt - 02 Ch

**Extra Technical Information Will Be Included When It Appears.**

This is the 1/10 scale, Tamiya electric powered, radio controlled,
Subaru WRX STI On-Road Race Car Kit.

FEATURES:
Chassis: TT-02 ABS resin bath tub type minimizes contact with the road
    upright assembly can be changed to offer chassis an additional 4mm of
    travel for Rally racing
Drive: 4 wheel, shaft driven, with dogbones
Motor: Tamiya Torque Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE02S brushless compatible
Differential: Equipment type
Wheels: Nylon construction, 10 spoke 12mm hex, 1.02" (26mm)
    broad 2.00" (51mm) size, weapon metal gray in color
Tires: Treaded rubber with foam inserts
Suspension: Fully independent double wishbone
Shocks: Plastic body, friction, not oil filled
Body: Clear polycarbonate with plastic side mirrors and rear wing
Camber: Non-adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind car
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the cars and truck in relation to the
    chassis
Steering: Bellcrank type
Bumper: Front, urethane

CONSISTS OF:
Tamiya Subaru WRX STI with 540 Brushed Motor, Tires,
    Wheels, Clear Body, Foam Inserts, ESC, Decals and Instructions

NEEDS:
Radio: 2-channel with high speed steering servo
Battery: 7.2V NiMH
Battery Battery charger: To match picked battery
Building and track equipment

SPECS:
Lorry-
Wheelbase: 17.4" (441mm)
Length: 18.6" (472mm)
    Body-
Length:
Width:
Height:

COMMENTS:
To upgrade to ball bearings order;
    Qty. Size Place Qty Bearing Set
2 5x11mm Spur Equipment 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
2 8x12mm Differential 1 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Rear Uprights 1 DTXC1535

Want an additional wonderful item to compliment the above discussed item?



RNR Drift Tires V3 (Difficult) 26mm (2)

RNR Drift tires make it possible for easy wandering on asphalt or carpet and drift tires for exceptional drift distances and angles.

Fits: 1/10 R/C touring cars and drift cars (HPI, Tamiya, Losi, Yokomo)

Fits 26mm wheels (HPI, Tamiya, Losi, Yokomo)

Specs:

Inner size: 50mm (1.9")

External size: 64mm (2.5")

Width: 26mm (1.02")

Weight: 16.9g

Get this item to enhance the one you are reading about.

Rc Audi Quattro A2 Rally Car Kit, Tt-02 Chassis

RC Audi Quattro A2 Rally Car Kit, TT-02 Chassis

The Audi Quattro A2 is an iconic Rally Race Car that made its mark in the 1980's. Tamiya's 1/10 scale radio control reproduction brings rally racing fun to hobbyists on the adaptable and easy-driving TT-02 chassis.

TT-02: Adaptable, Well Balanced Shaft Driven 4WD

The shaft-driven 4WD TT-02 chassis uses a longitudinal design with the battery on the left and the motor on the right, to offer exceptional stability. In addition, it includes similar left and best suspension arms and uprights for ease of assembly, plus easy-to-maintain transmissions. It is an extremely adaptable chassis, as it uses 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel centers and trendy front bumper supports.

Note: This is a kit and needs a radio system, servo, battery, battery charger and assembly.

Features:

A2 body is molded precisely in long lasting polycarbonate.

Functions metal-plated ABS parts for front and rear light cases, fog lamps.

5-spoke wheels are molded in silver, and paired with racing radial tires.

4-bevel differential equipments and 4-wheel double wishbone suspension.

Includes Tamiya Torque Tuned Motor.

Includes Tamiya TBLE-02S ESC (electronic speed control)