Excel Hobby Blades Corp. Medium Duty Knife w/Cap Carded

This is a Medium Duty Knife with Cap from Excel.

FEATURES:
7/16" x 4-3/4" knurled aluminum handle.
4-jaw machined aluminum chuck for secure blade positioning.
Includes one incredibly sharp #24 blade.
Snug fitting plastic safety cap.
Used for accuracy cutting, trimming and removing of paper, plastic,
    wood, fabric and film.
Carded packaging.

INCLUDES:
One Medium Duty Knife with Cap.

SPECS:
Length: 4-3/4" (12.1cm)
Diameter: 7/16" (1.1cm)

Lots of others have actually gotten this product in addition to the product that you are currently reviewing.

Assorted Blades #2 Knife (5)

This is a Package of Five Assorted Accuracy Pastime Blades by Excel.

FEATURES:
Made from accuracy, high-grade steel.
Double honed.
Interchangeable.
Used for cutting and trimming.
Razor sharp edges!
Contains 5 different blades.
Blades come in a clear, plastic safety tube.

INCLUDES:
Five Assorted Pastime Knife Blades

REQUIRES:
#2, #5, or #6 Aluminum Handle
Safety Goggles
Adult Guidance

Often gotten with the product that you are currently reviewing.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations.

FEATURES:
Gets rid of the requirement for a receiver and servo battery pack
Draws greater voltage from the motor batteries and drops it to a
    voltage level appropriate for the receiver and servos

INCLUDES:
One CC BEC receiver battery remover

REQUIRES:
Setup in the airplane

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (2S to 6S LiPo)
Existing output: 12 volts input = 7 amps* continuous, 10 amp peak;
    24 volts input = 5 amps* continuous, 7 amp peak
    *Ratings are figured out with a 5mph airflow on the BEC
Selectable Output: 4.8 - 9.0V by means of the Castle Link (offered separately)
    Default voltage is 5.1V

This product praises the above gone over product.



This is the JR/Hitec Unassembled Male Connector Set from EMS.

FEATURES:
Permits modeler to make their own servo leads and extensions
Gold plated pins for high conductivity and reliability fit wire sizes
    from 20 - 30 AWG

INCLUDES:
Ten male connectors
Thirty pins and instruction sheet

REQUIRES:
Crimping pins over wire and placing into port

REMARKS:
If matching Female Connectors are needed, order EMOM0118.
If servo wire is needed, order HRCM4804.
Note: Considered 'Male' since of the plastic port
keep in mind the metal pins

Lots of others have actually gotten this product in addition to the product that you are currently reviewing.

Super Sharp Straight Edge Blade (5)

These are Excel #2 Straight Edge Blades.

FEATURES:
Made from accuracy high-grade steel
Interchangeable
Utilized for the cutting and trimming of wood, plastic, and rubber
Blades can be found in a clear plastic safety tube

INCLUDES:
Five #2 Straight Edge Blades

REQUIRES:
Excel #2, 5, or 6, Handle
Safety goggles
Adult guidance