Excel Hobby Blades Corp. Medium Duty Knife w/Cap Carded

This is a Medium Responsibility Knife with Cap from Excel.

FEATURES:
7/16" x 4-3/4" knurled aluminum handle.
4-jaw machined aluminum chuck for protected blade positioning.
Includes one very sharp #24 blade.
Snug fitting plastic safety cap.
Used for precision cutting, trimming and stripping of paper, plastic,
    wood, cloth and film.
Carded packaging.

INCLUDES:
One Medium Responsibility Knife with Cap.

SPECS:
Length: 4-3/4" (12.1cm)
Size: 7/16" (1.1cm)

Numerous others have gotten this thing in addition to the thing that you are presently reading about.

Assorted Blades #2 Knife (5)

This is a Package of Five Various Precision Hobby Blades by Excel.

FEATURES:
Made from precision, high-grade steel.
Double honed.
Interchangeable.
Used for cutting and trimming.
Razor sharp edges!
Contains 5 various blades.
Blades come in a clear, plastic safety tube.

INCLUDES:
Five Various Hobby Knife Blades

REQUIRES:
#2, #5, or #6 Aluminum Handle
Security Goggles
Adult Supervision

Frequently gotten with the thing that you are presently reading about.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations.

FEATURES:
Eliminates the requirement for a receiver and servo battery pack
Draws greater voltage from the motor batteries and drops it to a
    voltage level suitable for the receiver and servos

INCLUDES:
One CC BEC receiver battery remover

REQUIRES:
Setup in the aircraft

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (2S to 6S LiPo)
Current output: 12 volts input = 7 amps* continuous, 10 amp peak;
    24 volts input = 5 amps* continuous, 7 amp peak
    *Scores are determined with a 5mph airflow on the BEC
Selectable Output: 4.8 - 9.0V through the Castle Link (sold separately)
    Default voltage is 5.1V

This thing praises the above discussed thing.



This is the JR/Hitec Unassembled Male Adapter Set from EMS.

FEATURES:
Permits modeler to make their own servo leads and extensions
Gold plated pins for high conductivity and reliability fit wire sizes
    from 20 - 30 AWG

INCLUDES:
10 male connectors
Thirty pins and guideline sheet

REQUIRES:
Crimping pins over wire and inserting into connector

REMARKS:
If matching Female Connectors are needed, order EMOM0118.
If servo wire is needed, order HRCM4804.
Note: Considered 'Male' because of the plastic connector
note the metal pins

Numerous others have gotten this thing in addition to the thing that you are presently reading about.

Super Sharp Straight Edge Blade (5)

These are Excel #2 Straight Edge Blades.

FEATURES:
Made from precision high-grade steel
Interchangeable
Utilized for the cutting and trimming of wood, plastic, and rubber
Blades can be found in a clear plastic safety tube

INCLUDES:
Five #2 Straight Edge Blades

REQUIRES:
Excel #2, 5, or 6, Handle
Security goggles
Adult guidance