Excel Hobby Blades Corp. Medium Duty Knife w/Cap Carded

This is a Medium Task Knife with Cap from Excel.

FEATURES:
7/16" x 4-3/4" knurled aluminum handle.
4-jaw machined aluminum chuck for secure blade positioning.
Includes one extremely sharp #24 blade.
Snug fitting plastic security cap.
Used for accuracy cutting, cutting and removing of paper, plastic,
    wood, fabric and film.
Carded packaging.

INCLUDES:
One Medium Task Knife with Cap.

SPECS:
Length: 4-3/4" (12.1cm)
Size: 7/16" (1.1cm)

Numerous others have purchased this product in addition to the product that you are presently reading about.

Assorted Blades #2 Knife (5)

This is a Bundle of Five Assorted Precision Pastime Blades by Excel.

FEATURES:
Made from accuracy, state-of-the-art steel.
Double honed.
Interchangeable.
Used for cutting and trimming.
Razor sharp edges!
Contains 5 different blades.
Blades been available in a clear, plastic security tube.

INCLUDES:
Five Assorted Pastime Knife Blades

REQUIRES:
#2, #5, or #6 Aluminum Manage
Security Goggles
Adult Supervision

Frequently purchased with the product that you are presently reading about.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations.

FEATURES:
Eliminates the need for a receiver and servo battery pack
Draws higher voltage from the motor batteries and drops it to a
    voltage level appropriate for the receiver and servos

INCLUDES:
One CC BEC receiver battery eliminator

REQUIRES:
Setup in the aircraft

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (TWO to SIX LiPo)
Existing output: 12 volts input = 7 amps* constant, 10 amp peak;
    24 volts input = 5 amps* constant, 7 amp peak
    *Ratings are identified with a 5mph airflow on the BEC
Selectable Output: 4.8 - 9.0V by means of the Castle Link (sold individually)
    Default voltage is 5.1V

This product compliments the above gone over product.



This is the JR/Hitec Unassembled Male Connector Set from EMS.

FEATURES:
Permits modeler to make their own servo leads and extensions
Gold plated pins for high conductivity and dependability fit wire sizes
    from 20 - 30 AWG

INCLUDES:
10 male ports
Thirty pins and guideline sheet

REQUIRES:
Crimping pins over wire and placing into port

REMARKS:
If matching Female Connectors are needed, order EMOM0118.
If servo wire is needed, order HRCM4804.
Note: Thought about 'Male' because of the plastic port
note the metal pins

Numerous others have purchased this product in addition to the product that you are presently reading about.

Super Sharp Straight Edge Blade (5)

These are Excel #2 Straight Edge Blades.

FEATURES:
Made from accuracy state-of-the-art steel
Interchangeable
Utilized for the cutting and cutting of wood, plastic, and rubber
Blades come in a clear plastic security tube

INCLUDES:
Five #2 Straight Edge Blades

REQUIRES:
Excel #2, 5, or 6, Manage
Security safety glasses
Adult guidance