Dynamite WP 60A FWD/REV Brushed ESC

This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it a perfect replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or restricted motor specification ESC.

1 While waterproof, this element has actually not been designed to immerse in water for extended periods of time and must NOT be treated like a submarine. Please be sure to read through the general precautions noted in the user???s manual.

Features
Waterproof for all weather condition operation1
LiPo and NiMH compatible
Program functions altered with using jumper pins
As much as an 8T motor limit
Removable installing tabs create an even smaller footprint and permit difficult installing in a wide variety of vehicles
Spider running mode
Pre-wired with EC3 battery port and RTR compatible motor bullets for simple setup

Specs
Type: Waterproof 60A Brushed ESC
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Spider Mode: Yes
Automobile Cutoff: Yes
Overload Defense: Yes
Low-Voltage Cutoff Programmable: Yes
Constant Present: FWD: 60A REV: 30A
Optimum Burst Current: FWD: 360A REV: 180A
Input Voltage: 2-3S Lipo, 5-9 cells NiMH/NiCd
Motor Limit: 2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, THREE Lipo/9cell NiMh >=13T 540/550 closed endbell motors
Battery Input Lead: 16AWG, 4.53 in (115mm)
Input Adapter Types: EC3
Motor Output Lead: 16AWG, 4.53 in (115mm)
Motor Adapter: 3.5mm Tamiya style bullet
Length: 1.48 in (37.5mm)
Width: 1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs
Height: 0.71 in (18mm)
Weight: 1.41 oz (40g)
PWM Frequency: 1KHz
Full On Resistance: .0008 ohms
BEC: Yes
BEC Type: Linear
BEC Voltage: 5V
BEC Continous Current: 2A
Speed Control Type: Brushed
Drive Type: Forward/Brake/Reverse
Constant Optimum Current (will be Amperage): 50 - 75A