Dynamite WP 60A FWD/REV Brushed ESC

This waterproof, brushed ESC is NiMH/LiPo compatible and provides forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it a perfect replacement ESC or the ideal upgrade to your present non-LiPo, non-waterproof, or restricted motor specification ESC.

1 While waterproof, this element has not been developed to immerse in water for extended periods of time and ought to NOT be dealt with like a submarine. Please be sure to go through the general safety measures noted in the user???s manual.

Features
Water resistant for all weather operation1
LiPo and NiMH compatible
Program functions changed with using jumper pins
Approximately an 8T motor limit
Detachable mounting tabs produce an even smaller footprint and allow tough mounting in a variety of automobiles
Crawler running mode
Pre-wired with EC3 battery port and RTR compatible motor bullets for easy setup

Specifications
Type: Water resistant 60A Brushed ESC
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Crawler Mode: Yes
Auto Cutoff: Yes
Overload Security: Yes
Low-Voltage Cutoff Programmable: Yes
Constant Existing: FWD: 60A REV: 30A
Maximum Burst Current: FWD: 360A REV: 180A
Input Voltage: 2-3S Lipo, 5-9 cells NiMH/NiCd
Motor Limitation: 2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors
Battery Input Lead: 16AWG, 4.53 in (115mm)
Input Port Types: EC3
Motor Output Lead: 16AWG, 4.53 in (115mm)
Motor Port: 3.5mm Tamiya design bullet
Length: 1.48 in (37.5mm)
Width: 1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs
Height: 0.71 in (18mm)
Weight: 1.41 oz (40g)
PWM Frequency: 1KHz
Full On Resistance: .0008 ohms
BEC: Yes
BEC Type: Linear
BEC Voltage: 5V
BEC Continous Current: 2A
Speed Control Type: Brushed
Drive Type: Forward/Brake/Reverse
Constant Maximum Current (will be Amperage): 50 - 75A