Dynamite WP 60A FWD/REV Brushed ESC

This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and spider drive modes. Its compatibility makes it an ideal replacement ESC or the ideal upgrade to your existing non-LiPo, non-waterproof, or minimal motor specification ESC.

1 While waterproof, this element has not been designed to immerse in water for extended periods of time and must NOT be dealt with like a submarine. Please be sure to go through the basic preventative measures listed in the user???s manual.

Features
Waterproof for all weather condition operation1
LiPo and NiMH compatible
Program functions changed with using jumper pins
As much as an 8T motor limit
Detachable mounting tabs produce an even smaller sized footprint and permit hard mounting in a variety of automobiles
Crawler running mode
Pre-wired with EC3 battery port and RTR compatible motor bullets for simple setup

Specs
Type: Waterproof 60A Brushed ESC
Forward: Yes
Reverse: Yes
Brake: Yes
Dead time Brake: Yes
Crawler Mode: Yes
Automobile Cutoff: Yes
Overload Security: Yes
Low-Voltage Cutoff Programmable: Yes
Constant Present: FWD: 60A REV: 30A
Maximum Burst Current: FWD: 360A REV: 180A
Input Voltage: 2-3S Lipo, 5-9 cells NiMH/NiCd
Motor Limit: TWO Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors
Battery Input Lead: 16AWG, 4.53 in (115mm)
Input Connector Types: EC3
Motor Output Lead: 16AWG, 4.53 in (115mm)
Motor Connector: 3.5mm Tamiya style bullet
Length: 1.48 in (37.5mm)
Width: 1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs
Height: 0.71 in (18mm)
Weight: 1.41 oz (40g)
PWM Frequency: 1KHz
Complete On Resistance: .0008 ohms
BEC: Yes
BEC Type: Linear
BEC Voltage: 5V
BEC Continous Current: 2A
Speed Control Type: Brushed
Drive Type: Forward/Brake/Reverse
Constant Maximum Current (will be Amperage): 50 - 75A