DuraTrax Charge Lead Banana Plugs to Vend MQ CC RS4

This is the DuraTrax Charge Lead
with Banana Plugs and Mini Plug for usage with the
Duratrax Mini Quake, Vendetta, and Cliff Climber
HPI Micro RS4, Losi Mini's and lots of other 1/18 scale vehicles.

FEATURES:
Charges a battery with a Mini Plug

INCLUDES:
One DuraTrax Charge Lead with Banana Plugs and Mini Plug

REQUIRES:
Linking in between battery and battery charger

Want another great thing to match the above mentioned thing?



This is the DuraTrax LiPo 7.4V 1600mAh 20C Tough Case Mini Battery Pack
with Mini Plug.

FEATURES:
For usage in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
    1/16 to 1/18 scale vehicles that use batteries with mini plugs

INCLUDES:
DuraTrax LiPo 7.4V 1600mAh 20C Tough Case Battery Pack with Mini Plug

REQUIRES:
Balancer such as the Group Checkpoint Balancer, and 2S
    Adapter XH Plug,

SPECS:
Capacity: 1600mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Constant Discharge Rate: 20C
Optimum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug
Release Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
Pack Measurements: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are included in weights

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge from the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER disassemble or customize pack circuitry in any method or puncture cells
NEVER place on combustible products or leave ignored during
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of children
All weights include wire leads and plugs
All weights +/- 1g
All measurements +/- 1mm

This is a great enhancement to the thing presently being gone over.



This is the Racers Edge EZ80 Air Conditioner DC Multi-Chemistry Charger.

Features:

Created to be user-friendly to operate
Can charge NiCd, NiMH, LiPo, Life as well as Pb Acid Gelcell (starter) batteries
Both Air Conditioner and DC power options
One year item service warranty versus maker defects (from the maker - Racers Edge)

Consists of:
One Racers Edge EZ80 Air Conditioner DC Multi-Chemistry Charger

Requires:
Compatible battery

Specs
Input Voltage Air Conditioner: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Optimum
Discharge Power: 10W Optimum
Balance Current: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Measurements: Approx. 145x145x56mm