DuraTrax Charge Lead Banana Plugs to Vend MQ CC RS4

This is the DuraTrax Charge Lead
with Banana Plugs and Mini Plug for use with the
Duratrax Mini Quake, Vendetta, and Cliff Climber
HPI Micro RS4, Losi Mini's and numerous other 1/18 scale vehicles.

FEATURES:
Charges a battery with a Mini Plug

INCLUDES:
One DuraTrax Charge Lead with Banana Plugs and Mini Plug

REQUIRES:
Linking in between battery and battery charger

Want an additional terrific thing to enhance the above mentioned thing?



This is the DuraTrax LiPo 7.4V 1600mAh 20C Difficult Case Mini Battery Load
with Mini Plug.

FEATURES:
For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
    1/16 to 1/18 scale automobiles that use batteries with mini plugs

INCLUDES:
DuraTrax LiPo 7.4V 1600mAh 20C Difficult Case Battery Load with Mini Plug

REQUIRES:
Balancer such as the Group Checkpoint Balancer, and 2S
    Adapter XH Plug,

SPECIFICATIONS:
Capability: 1600mAh
Variety of Cells in Series: 2
Rated Voltage: 7.4V
Constant Discharge Rate: 20C
Optimum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug
Release Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
Load Dimensions: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are consisted of in weights

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER take apart or customize pack wiring in any method or leak cells
NEVER place on combustible products or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of children
All weights include wire leads and plugs
All weights +/- 1g
All measurements +/- 1mm

This is a fantastic addition to the thing currently being gone over.



This is the Racers Edge EZ80 AC DC Multi-Chemistry Charger.

Features:

Created to be instinctive to run
Can charge NiCd, NiMH, LiPo, Life and even Pb Acid Gelcell (starter) batteries
Both AC and DC power options
One year item service warranty versus maker problems (through the maker - Racers Edge)

Includes:
One Racers Edge EZ80 AC DC Multi-Chemistry Charger

Needs:
Suitable battery

Specs
Input Voltage AC: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Optimum
Discharge Power: 10W Optimum
Balance Current: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Dimensions: Approx. 145x145x56mm