DuraTrax Charge Lead Banana Plugs to Vend MQ CC RS4

This is the DuraTrax Charge Lead
with Banana Plugs and Mini Plug for use with the
Duratrax Mini Quake, Vendetta, and Cliff Climber
HPI Micro RS4, Losi Mini's and numerous other 1/18 scale vehicles.

FEATURES:
Charges a battery with a Mini Plug

CONSISTS OF:
One DuraTrax Charge Lead with Banana Plugs and Mini Plug

REQUIRES:
Linking between battery and charger

Want one more great product to match the above stated product?



This is the DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Mini Battery Pack
with Mini Plug.

FEATURES:
For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
    1/16 to 1/18 scale automobiles that utilize batteries with mini plugs

CONSISTS OF:
DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Battery Pack with Mini Plug

REQUIRES:
Balancer such as the Team Checkpoint Balancer, and 2S
    Adapter XH Plug,

SPECIFICATIONS:
Capability: 1600mAh
Variety of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 20C
Maximum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug
Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
Pack Measurements: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are included in weights

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER take apart or modify pack wiring in any method or leak cells
NEVER place on combustible products or leave unattended throughout
    charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1g
All measurements +/- 1mm

This is a great enhancement to the product currently being gone over.



This is the Racers Edge EZ80 AC DC Multi-Chemistry Charger.

Features:

Developed to be user-friendly to run
Can charge NiCd, NiMH, LiPo, Life and even Pb Acid Gelcell (starter) batteries
Both AC and DC power alternatives
One year item warranty against manufacturer defects (through the manufacturer - Racers Edge)

Consists of:
One Racers Edge EZ80 AC DC Multi-Chemistry Charger

Needs:
Compatible battery

Specifications
Input Voltage AC: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Present: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Measurements: Approx. 145x145x56mm