DuraTrax Charge Lead Banana Plugs to Vend MQ CC RS4

This is the DuraTrax Charge Lead
with Banana Plugs and Mini Plug for usage with the
Duratrax Mini Quake, Vendetta, and Cliff Climber
HPI Micro RS4, Losi Mini's and numerous other 1/18 scale vehicles.

FEATURES:
Charges a battery with a Mini Plug

CONSISTS OF:
One DuraTrax Charge Lead with Banana Plugs and Mini Plug

NEEDS:
Connecting between battery and charger

Want one more fantastic item to enhance the above stated item?



This is the DuraTrax LiPo 7.4V 1600mAh 20C Tough Case Mini Battery Pack
with Mini Plug.

FEATURES:
For usage in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
    1/16 to 1/18 scale cars that utilize batteries with mini plugs

CONSISTS OF:
DuraTrax LiPo 7.4V 1600mAh 20C Tough Case Battery Pack with Mini Plug

NEEDS:
Balancer such as the Group Checkpoint Balancer, and TWO
    Adapter XH Plug,

SPECS:
Capability: 1600mAh
Variety of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 20C
Maximum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug
Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
Pack Measurements: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are consisted of in weights

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge from the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any method or puncture cells
NEVER place on combustible products or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1g
All measurements +/- 1mm

This is a great enhancement to the item currently being talked about.



This is the Racers Edge EZ80 A/C DC Multi-Chemistry Charger.

Features:

Designed to be intuitive to run
Can charge NiCd, NiMH, LiPo, Life as well as Pb Acid Gelcell (starter) batteries
Both A/C and DC power choices
One year product warranty versus manufacturer flaws (from the manufacturer - Racers Edge)

Includes:
One Racers Edge EZ80 A/C DC Multi-Chemistry Charger

Needs:
Suitable battery

Specifications
Input Voltage A/C: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Existing: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Measurements: Approx. 145x145x56mm