Dumas L-19 Bird Dog Kit 40

This is the electrical powered, radio controlled, park scale
Dumas L19 Bird Dog Aircraft Kit.

FEATURES:
Building: Laser cut balsa
Wing: 2 piece with center area, high mount positioning
Covering: 2 sheets of red and two sheets of white tissue
Cowl: Vacuum formed plastic, white in color
Landing Gear: Preformed wire .062" (1.6mm) diameter with .032"
    (0.81mm) diameter tail wheel wire
Wheels: 2 1.75" (45mm) diameter light-weight foam main wheels and
    one 0.75" (19mm) plastic tail wheel
Windows: 3 sheets acetate with pattern in manual for all windows
Rudder: Pull-pull style with horn and cables consisted of

INCLUDES:
All required balsa, two sheets red and two sheets white tissue, cowl,
    two decal sheets, three wheels, three acetate sheets, hardware,
    instruction manual and two full-size plan sheets

REQUIRES:
Electric Motor: GWS "A" (IPS-DX2BB-AXCS) or MPI EPU-6 drive system
    suggested per Dumas
Radio: 3-channel with micro size receiver
Servos: 2 micro size for rudder and elevator
Electronic Speed Control: 5A with BEC
Battery: 7.4V 700mAh Lithium Polymer
Prop: 9x7 for electrical application
Complete For Covering: Butyrate dope such as Midwest Aerogloss, light-
    weight Mylar covering can also be used, see REMARKS
Structure and field equipment

SPECS:
Length: 27" (68.6cm)
Wingspan: 40" (101.6cm)
Wing Area: 215 sq in (13.89 sq dm)
Motor Placement: Offset 1.5° ideal thrust
Center of mass (CG): 1-7/8" (48mm) from the leading edge of the
    wing determined at the fuselage
Control Throws:
    Elevator: up and down 3/4" (19mm)
    Rudder: left and ideal 7/8" (22mm)
    Airfoil: Flat bottom

REMARKS:
Do not use Ultra Cote or MonoKote covering. It is too heavy and will
    shrink too much, harming the light-weight structures.