Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to offer the supreme in fuel filtration.
Can be used with fuel or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Frequently acquired with the thing that you are presently checking out.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction decreases rotating mass
    for higher output and longer life.
Reinforcing carbon fibers help keep real, constant pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Density at center: 1/2" Hole size: 1/4"

Want another terrific thing to enhance the above stated thing?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Ideal for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the diverse throttle range of off-road racing
Medium heat range

INCLUDES:
One Traxxas Medium Heat Variety Super Responsibility Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

Want another terrific thing to enhance the above stated thing?

Air Filter Stampede

This is the Replacement Air Filter Aspect for the Traxxas Nitro Stampede.
    This aspect lies in the rubber air filter body.

FEATURES:
Pre-oiled

INCLUDES:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the total air filter with rubber body, usage TRAC4060.
The rubber filter body is not offered individually.

Below is a terrific thing that several others have bought at the very same time.

Universal Servo Grease

This is for usage with all manufacturers' servo gear sets.
To usage, simply take apart servo, throughly clean all old grease off gears, and
use brand-new grease moderately during reassembly.
The grease (.1 oz) is available in a small toothpaste-like metal tube.

DEE
8.Oct.97

Below is a terrific thing that several others have bought at the very same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This allows you to extend the distance in between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Setup

SPECS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: positive
Yellow: signal

This thing is regularly acquired with the above stated thing.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and clean filtering mesh

INCLUDES:
One assembled fuel filter

NEEDS:
Setting up with basic fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
Outer size: 10.5mm (0.41")

REMARKS:
The length of the filter is measured from suggestion to tip, not the main
    body of the filter.