Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to offer the supreme in fuel filtration.
Can be used with fuel or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Regularly gotten with the product that you are presently reading about.



This is a 12.5x6 plane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building minimizes turning mass
    for higher output and longer life.
Reinforcing carbon fibers help preserve true, constant pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

Want an additional terrific product to match the above discussed product?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the diverse throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Variety Super Duty Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro content

Want an additional terrific product to match the above discussed product?

Air Filter Stampede

This is the Replacement Air Filter Aspect for the Traxxas Nitro Stampede.
    This aspect lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the complete air filter with rubber body, use TRAC4060.
The rubber filter body is not available separately.

Here is a terrific product that many others have actually bought at the same time.

Universal Servo Grease

This is for use with all makers' servo gear sets.
To use, simply take apart servo, throughly tidy all old grease off gears, and
utilize brand-new grease moderately throughout reassembly.
The grease (.1 oz) can be found in a little toothpaste-like metal tube.

DEE
8.Oct.97

Here is a terrific product that many others have actually bought at the same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the distance in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Installation

SPECIFICATIONS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This product is often gotten with the above discussed product.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and tidy filtering mesh

CONSISTS OF:
One put together fuel filter

REQUIRES:
Setting up with standard fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
External size: 10.5mm (0.41")

REMARKS:
The length of the filter is measured from pointer to tip, not the primary
    body of the filter.