Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to provide the ultimate in fuel filtration.
Can be used with fuel or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Frequently gotten with the item that you are currently reviewing.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon construction lowers turning mass
    for greater output and longer life.
Reinforcing carbon fibers help preserve true, constant pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props require balancing, this is ESSENTIAL, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at center: 1/2" Hole diameter: 1/4"

Want one more fantastic item to compliment the above stated item?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Fit for the varied throttle range of off-road racing
Medium heat range

INCLUDES:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

Want one more fantastic item to compliment the above stated item?

Air Filter Stampede

This is the Replacement Air Filter Aspect for the Traxxas Nitro Stampede.
    This element is located in the rubber air filter body.

FEATURES:
Pre-oiled

INCLUDES:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the total air filter with rubber body, use TRAC4060.
The rubber filter body is not available separately.

Right here is a fantastic item that several others have actually bought at the exact same time.

Universal Servo Grease

This is for use with all producers' servo gear sets.
To use, merely dismantle servo, throughly clean all old grease off gears, and
utilize brand-new grease sparingly throughout reassembly.
The grease (.1 oz) comes in a little toothpaste-like metal tube.

DEE
8.Oct.97

Right here is a fantastic item that several others have actually bought at the exact same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This enables you to extend the range between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Installation

SPECIFICATIONS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This item is often gotten with the above stated item.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to remove and clean filtering mesh

INCLUDES:
One put together fuel filter

NEEDS:
Setting up with standard fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
Outer diameter: 10.5mm (0.41")

REMARKS:
The length of the filter is measured from tip to tip, not the main
    body of the filter.