Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to offer the ultimate in fuel filtration.
Can be used with fuel or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Regularly gotten with the thing that you are presently checking out.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction lowers rotating mass
    for greater output and longer life.
Reinforcing carbon fibers assist maintain true, constant pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props need balancing, this is VERY important, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Density at hub: 1/2" Hole diameter: 1/4"

Want one more terrific thing to match the above mentioned thing?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Matched for the diverse throttle variety of off-road racing
Medium heat variety

INCLUDES:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro content

Want one more terrific thing to match the above mentioned thing?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This element is located in the rubber air filter body.

FEATURES:
Pre-oiled

INCLUDES:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the complete air filter with rubber body, use TRAC4060.
The rubber filter body is not offered individually.

Right here is a terrific thing that many others have actually purchased the very same time.

Universal Servo Grease

This is for use with all producers' servo gear sets.
To use, simply take apart servo, throughly clean all old grease off gears, and
utilize brand-new grease sparingly throughout reassembly.
The grease (.1 oz) is available in a small toothpaste-like metal tube.

DEE
8.Oct.97

Right here is a terrific thing that many others have actually purchased the very same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This allows you to extend the distance in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Installation

SPECS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This thing is frequently gotten with the above mentioned thing.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and clean filtering mesh

INCLUDES:
One put together fuel filter

REQUIRES:
Setting up with conventional fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
Outer diameter: 10.5mm (0.41")

COMMENTS:
The length of the filter is determined from pointer to tip, not the primary
    body of the filter.