Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to supply the ultimate in fuel filtration.
Can be utilized with gasoline or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Frequently bought with the product that you are presently reading about.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction lowers rotating mass
    for higher output and longer life.
Reinforcing carbon fibers help maintain true, constant pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props need balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Density at center: 1/2" Hole diameter: 1/4"

Want an additional wonderful product to enhance the above stated product?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Suitable for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the diverse throttle range of off-road racing
Medium heat range

INCLUDES:
One Traxxas Medium Heat Range Super Responsibility Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

Want an additional wonderful product to enhance the above stated product?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This aspect lies in the rubber air filter body.

FEATURES:
Pre-oiled

INCLUDES:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not readily available independently.

Here is a wonderful product that many others have actually bought at the exact same time.

Universal Servo Grease

This is for usage with all makers' servo gear sets.
To usage, merely take apart servo, throughly clean all old grease off gears, and
use brand-new grease sparingly during reassembly.
The grease (.1 oz) is available in a little toothpaste-like metal tube.

DEE
8.Oct.97

Here is a wonderful product that many others have actually bought at the exact same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the range in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Installation

SPECS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This product is often bought with the above stated product.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to get rid of and clean filtering mesh

INCLUDES:
One assembled fuel filter

REQUIRES:
Installing with basic fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
Outer diameter: 10.5mm (0.41")

REMARKS:
The length of the filter is determined from idea to tip, not the main
    body of the filter.