Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to offer the ultimate in fuel filtration.
Can be utilized with fuel or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Frequently bought with the item that you are currently reviewing.



This is a 12.5x6 aircraft propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon construction reduces turning mass
    for greater output and longer life.
Reinforcing carbon fibers assist keep real, continuous pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Thickness at center: 1/2" Hole size: 1/4"

Want one more terrific item to match the above mentioned item?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Suitable for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Fit for the different throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Variety Super Duty Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro content

Want one more terrific item to match the above mentioned item?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This aspect is located in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the total air filter with rubber body, use TRAC4060.
The rubber filter body is not readily available individually.

Here is a terrific item that lots of others have bought at the exact same time.

Universal Servo Grease

This is for use with all manufacturers' servo gear sets.
To use, merely dismantle servo, throughly clean all old grease off gears, and
use new grease moderately during reassembly.
The grease (.1 oz) comes in a little toothpaste-like metal tube.

DEE
8.Oct.97

Here is a terrific item that lots of others have bought at the exact same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the distance in between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Setup

SPECS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: unfavorable
Red: positive
Yellow: signal

This item is regularly bought with the above mentioned item.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to get rid of and clean filtering mesh

CONSISTS OF:
One assembled fuel filter

NEEDS:
Setting up with standard fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
External size: 10.5mm (0.41")

COMMENTS:
The length of the filter is measured from suggestion to tip, not the main
    body of the filter.