Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to offer the supreme in fuel filtration.
Can be used with gas or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Regularly gotten with the product that you are presently reviewing.



This is a 12.5x6 plane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building and construction minimizes turning mass
    for greater output and longer life.
Reinforcing carbon fibers assist keep true, consistent pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props require balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Thickness at center: 1/2" Hole diameter: 1/4"

Want another excellent product to compliment the above mentioned product?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Ideal for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the different throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

Want another excellent product to compliment the above mentioned product?

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This aspect is located in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the total air filter with rubber body, use TRAC4060.
The rubber filter body is not offered independently.

Here is a excellent product that numerous others have actually purchased the same time.

Universal Servo Grease

This is for use with all producers' servo gear sets.
To use, merely disassemble servo, throughly clean all old grease off gears, and
utilize brand-new grease moderately during reassembly.
The grease (.1 oz) can be found in a little toothpaste-like metal tube.

DEE
8.Oct.97

Here is a excellent product that numerous others have actually purchased the same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This allows you to extend the range in between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Setup

SPECS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: unfavorable
Red: positive
Yellow: signal

This product is regularly gotten with the above mentioned product.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to remove and clean filtering mesh

CONSISTS OF:
One put together fuel filter

NEEDS:
Setting up with conventional fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
Outer diameter: 10.5mm (0.41")

COMMENTS:
The length of the filter is measured from pointer to tip, not the main
    body of the filter.