Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to offer the supreme in fuel filtration.
Can be used with gasoline or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Regularly bought with the thing that you are presently reading about.



This is a 12.5x6 plane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction decreases turning mass
    for higher output and longer life.
Reinforcing carbon fibers help preserve true, continuous pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Density at hub: 1/2" Hole diameter: 1/4"

Want an additional wonderful thing to compliment the above mentioned thing?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Ideal for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the varied throttle variety of off-road racing
Medium heat variety

INCLUDES:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

Want an additional wonderful thing to compliment the above mentioned thing?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This element is located in the rubber air filter body.

FEATURES:
Pre-oiled

INCLUDES:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not readily available separately.

Here is a wonderful thing that lots of others have purchased the exact same time.

Universal Servo Grease

This is for usage with all makers' servo gear sets.
To usage, just disassemble servo, throughly tidy all old grease off gears, and
utilize new grease sparingly throughout reassembly.
The grease (.1 oz) is available in a little toothpaste-like metal tube.

DEE
8.Oct.97

Here is a wonderful thing that lots of others have purchased the exact same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the range in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Setup

SPECS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: unfavorable
Red: favorable
Yellow: signal

This thing is often bought with the above mentioned thing.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to remove and tidy filtering mesh

INCLUDES:
One put together fuel filter

REQUIRES:
Installing with standard fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
External diameter: 10.5mm (0.41")

COMMENTS:
The length of the filter is measured from idea to tip, not the primary
    body of the filter.