Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to offer the ultimate in fuel filtration.
Can be utilized with fuel or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Frequently gotten with the thing that you are presently checking out.



This is a 12.5x6 plane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass
    for higher output and longer life.
Reinforcing carbon fibers assist preserve real, continuous pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props require balancing, this is ESSENTIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

Want an additional excellent thing to enhance the above mentioned thing?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Matched for the different throttle range of off-road racing
Medium heat range

CONSISTS OF:
One Traxxas Medium Heat Range Super Responsibility Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro content

Want an additional excellent thing to enhance the above mentioned thing?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This element lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not readily available separately.

Here is a excellent thing that lots of others have actually bought at the same time.

Universal Servo Grease

This is for usage with all manufacturers' servo gear sets.
To usage, just take apart servo, throughly clean all old grease off gears, and
utilize brand-new grease moderately during reassembly.
The grease (.1 oz) is available in a little toothpaste-like metal tube.

DEE
8.Oct.97

Here is a excellent thing that lots of others have actually bought at the same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This allows you to extend the range between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Setup

SPECS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: unfavorable
Red: positive
Yellow: signal

This thing is often gotten with the above mentioned thing.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and clean filtering mesh

CONSISTS OF:
One assembled fuel filter

REQUIRES:
Installing with conventional fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
External size: 10.5mm (0.41")

REMARKS:
The length of the filter is measured from suggestion to tip, not the main
    body of the filter.