Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to supply the ultimate in fuel filtration.
Can be used with gasoline or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Frequently acquired with the product that you are presently reviewing.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction reduces turning mass
    for greater output and longer life.
Reinforcing carbon fibers help maintain true, consistent pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props need balancing, this is VERY important, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Density at hub: 1/2" Hole diameter: 1/4"

Want an additional excellent product to match the above pointed out product?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Fit for the varied throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

Want an additional excellent product to match the above pointed out product?

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This element lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the total air filter with rubber body, use TRAC4060.
The rubber filter body is not available individually.

Here is a excellent product that several others have purchased the very same time.

Universal Servo Grease

This is for use with all producers' servo gear sets.
To use, just take apart servo, throughly tidy all old grease off gears, and
use brand-new grease sparingly throughout reassembly.
The grease (.1 oz) is available in a small toothpaste-like metal tube.

DEE
8.Oct.97

Here is a excellent product that several others have purchased the very same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This allows you to extend the range between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Setup

SPECIFICATIONS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This product is frequently acquired with the above pointed out product.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and tidy filtering mesh

CONSISTS OF:
One assembled fuel filter

NEEDS:
Setting up with basic fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
Outer diameter: 10.5mm (0.41")

REMARKS:
The length of the filter is determined from idea to tip, not the main
    body of the filter.