Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to provide the ultimate in fuel filtration.
Can be used with gas or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Regularly acquired with the item that you are presently checking out.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building lowers turning mass
    for greater output and longer life.
Reinforcing carbon fibers help keep real, consistent pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props need balancing, this is CRUCIAL, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Density at center: 1/2" Hole size: 1/4"

Want an additional wonderful item to enhance the above pointed out item?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Fit for the diverse throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Variety Super Task Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro content

Want an additional wonderful item to enhance the above pointed out item?

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This aspect lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the total air filter with rubber body, use TRAC4060.
The rubber filter body is not readily available independently.

Below is a wonderful item that several others have actually purchased the same time.

Universal Servo Grease

This is for use with all manufacturers' servo gear sets.
To use, merely disassemble servo, throughly tidy all old grease off gears, and
utilize brand-new grease moderately during reassembly.
The grease (.1 oz) comes in a small toothpaste-like metal tube.

DEE
8.Oct.97

Below is a wonderful item that several others have actually purchased the same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This allows you to extend the distance between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Installation

SPECS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This item is often acquired with the above pointed out item.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and tidy filtering mesh

CONSISTS OF:
One put together fuel filter

REQUIRES:
Installing with standard fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
Outer size: 10.5mm (0.41")

REMARKS:
The length of the filter is determined from tip to tip, not the primary
    body of the filter.