Dubro 3" Super Lite Wheels

These are 3" Super Lite Wheels from Dubro.

FEATURES:
Black impact-absorbing foam building pre-mounted on
gray plastic 7 spoke rims.
Rib tread design.

INCLUDES:
Two 3" Super Lite Pre-mounted Wheels

REQUIRES:
Wheel collars to hold them on the axle.
May need reaming out the hole to install on bigger axle.

SPECS:
Diameter: 3" OD
Diameter: .178" axle hole
Weight: 13.84 gr

Want another wonderful product to match the above discussed product?

11x8 Thin Electric Prop

This is an 11x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft just (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adjuster rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props need balancing, this is CRUCIAL, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 11" (279mm)
Pitch: 8
Hub inner diameter: 0.25" (6.3mm)

This product is regularly purchased with the above discussed product.



MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Economical,
Easy, Clean, and When Compared to "old made" Coverings, Quick To Use.

For great covering ideas and to guarantee a professional finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq feet
Dry Adhesive is Triggered When Heat is Applied
Diminishes to a Drum-Tight Complete As It Cools
High Gloss Complete
Fuelproof and Water resistant
More powerful and Lighter Than Standard Silk and Dope Coverings
May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Aluminum Covering
One Direction Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Various Lots of MonoKote May
    Vary Slightly In Color Between Production Runs of These Products.
If Using 3 or More Rolls of the Very same Color, it is Suggested to
    Use a 25' Roll (TOPQ1205) To Guarantee the Very same Dye Lot for the Entire
    Model Being Covered.
LustreKote Guide Should Be Utilized With LustreKote Paint to Draw out Its
    True Color.
MonoKote Trim Sheet: TOPQ4105

MonoKote is a High Temperature level Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam
    (EconoKote may be utilized on top of, but not under MonoKote.)
Temperature level Varies:
    Connecting to Wood: 215 - 240°F (turning on the glue)
    Partial Shrinking: 230 - 270°F
    Maximum Shrinking: 270 - 350°F

This product is regularly purchased with the above discussed product.

3/32" Nickel Plated Dura Collars

These are 3/32" Nickel Plated Brass Dura-Collars.

FEATURES:
Nickel plated brass construction.

INCLUDES:
4 collars
4 4-40 x1/8" set screws
One .050" allen wrench

REQUIRES:
Installation.

SPECS:
Length: .189"
Diameter: 3/32" ID .248 OD