Dubro 2 1/2" Super Lite Wheels

These are 2-1/2" Super Lite Wheels from Dubro.

FEATURES:
Black impact-absorbing foam building and construction pre-mounted.
Gray plastic eight spoke rims.
Five Rib tread design.

INCLUDES:
Two 2-1/2" Super Lite Pre-mounted Wheels

NEEDS:
Wheel collars to hold them on the axle.
May need reaming out the hole to mount on larger axle.

SPECS:
Diameter: 63.5mm (2-1/2") O.D.
Axle size: 4.4mm (.175")
General width: 20mm (.788")
Weight: 9.65 grams each

This is a superb addition to the thing currently being discussed.

2" Super Lite Wheels

These are 2" Super Lite Wheels from Dubro.

FEATURES:
Black impact taking in foam building and construction pre-mounted.
Gray plastic eight spoke rims.
Seven rib tread design.

INCLUDES:
Two 2" Super Lite Pre-mounted Wheels

NEEDS:
Wheel collars to hold them on the axle.
May need reaming out the hole to mount on larger axle.

SPECS:
Diameter: 50.8mm (2")
Axle Diameter: 3.5mm (.141")
Width: 17.4mm (.686")
Weight: 5.22 grams each wheel

You will certainly like this thing if you have the thing earlier discussed.

1/8" Nickel Plated Dura Collars

These are 1/8" Nickel Plated Brass Dura-Collars.

FUNCTIONS:
Nickel plated brass construction.

INCLUDES:
4 collars
4 4-40 x1/8" set screws
One .050" allen wrench

NEEDS:
Installation.

SPECS:
Length: .189"
Diameter: 1/8" ID .281 OD

This thing praises the main item below.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made using a pultrusion procedure. This approach
    usages|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, allowing for a greater fiber (60%) to resin (nylon binder)
    density. Offering significantly higher strength and tightness than
    glass filled nylon.
The extra tightness is helpful to control of vibration
    resonance response.
The higher strength allows the usage of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props need balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Center Thickness: 0.40"
Center Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with radiance engines.