Dubro Spinner 2" Blue

This is the DuBro Blue 2" Nylon Spinner for 2 Blade Props

FEATURES:
Red nylon building
Interchangeable nylon adapters for usage on different size prop shafts

CONSISTS OF:
One 2" spinner
One spinner backplate
Two 4-40 nylon lock nuts
Two 4-40 x 1/2" cap head screws
5 nylon adapers for the following crankshaft sizes:
5/16", 9/32", 1/4", 7/32", 3/16"
Directions on header card

REQUIRES:
A 3/32" hex wrench for cap head screws

SPECIFICATIONS:
Length: 2-1/8"
Diameter: 2" OD of spinner at rear
3/8" crankshaft hole (adjustable with consisted of adapters)

REMARKS:
Care must be used when mounting the spinner. Failure to follow
the consisted of guidelines thoroughly may result in injury.

updt total id tjt 072705