Dubro Socket Set Screws 3x5mm (4)

These are 3x5mm Socket Set Screws from Dubro's Car Line.

FEATURES:
Plain black steel building and construction
Hexagon socket drive insert.

INCLUDES:
(4) Socket Set Screws

NEEDS:
1.5mm Allen Wrench (GPMR8010)

SPECS:
Thread Size: 3mm
Length: 5mm

This thing compliments the main item below.

Hs-55 Sub Micro Servo, .14Sec/18Oz @ 6.0V

    This is the Hitec HS-55 Sub Micro (Plume) Servo with a
Futaba J, Hitec S, JR, Airtronics Z-type Connector.

FEATURES:
Really slim case and lightweight for installing in small airplanes,
    electrics or gliders, where extremely high speed and good torque are
    critical.
One of the slimmest micro servos available.
High-strength resin equipment train offers dependable operation.

INCLUDES:
One HS-55 Servo w/pre-installed small X-shaped servo horn and screw
One extremely small straight servo horn
One M1.7x3 servo horn screw
One small straight servo horn
2 M1.7x7 servo installing screws

at 4.8V
SPECS:
Speed: 0.17 sec at 60°
Output Torque: 15.27 oz-in (1.1 kg-cm)
Weight: 0.27oz (7.8g)
Length: 0.89" (22.8mm)
Width: 0.45" (11.6mm)
Height: 0.94" (24mm)

Several others have actually purchased this thing together with the thing that you are currently checking out.

Socket Set Screws, 4Mm, 4/Pkg

These are 4x4mm Socket Set Screws from Dubro's Car Line.

FEATURES:
Plain black steel building and construction
Hexagon socket drive insert.

INCLUDES:
(4) Socket Set Screws

NEEDS:
2mm Allen Wrench (GPMR8011)

SPECS:
Thread Size: 4mm
Length: 4mm

Below is an additional thing that compliments the thing being discussed.

Socket Set Screws, 3Mm, 4/Pkg

These are 3x3mm Socket Set Screws from Dubro's Car Line.

FEATURES:
Plain black steel building and construction
Hexagon socket drive insert.

INCLUDES:
(4) Socket Set Screws

NEEDS:
1.5mm Allen Wrench (GPMR8010)

SPECS:
Thread Size: 3mm
Length: 3mm

This thing compliments the above discussed thing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

SUCHES AS:
One spur equipment

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Often purchased with the thing that you are currently checking out.

Hexagon Screw Driver

Utilizing on heli's M2 socket screw and M3 socket screw!

Specifications:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

This is a great addition to the thing currently being discussed.

2.5Mm X 6 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are ideal for locations where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball motorist. The screws
been available in a variety of diameters and lengths. This uses a 2.5mm balldriver
(BONR1110).

This is a great addition to the thing currently being discussed.



This is the Sturdy 12" Extension with
JR/Hitec/Z Connectors from EMS.

FEATURES:
Sturdy extension

SUCHES AS:
One 12" strong extension with JR/Hitec/Z ports

SPECS:
Total Length: 12" (305mm)
Connectors: one male and two female

Several others have actually purchased this thing together with the thing that you are currently checking out.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Supplies a safe and secure connection for battery and motor connections on
    R/C vehicles

SUCHES AS:
2 WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

NEEDS:
Soldering ports onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end usage WSDM1302
For both Male and Female usage WSDM3001