Dubro 3.0Mm X 10 Socket Head Cap Screws (4/Pkg)

These are 3x10mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 10mm
Diameter: 3mm

Below is a excellent product that many others have bought at the same time.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Automobile Line (Metric).

FEATURES:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECIFICATIONS:
Diameter: 3mm

Below is a excellent product that many others have bought at the same time.

3.0Mm X 15 Socket Head Cap Screws (4/Pkg)

These are 3x15mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

This product is regularly purchased with the above pointed out product.

3.0Mm X 8 Socket Head Cap Screws (4/Pkg)

These are 3x8mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 8mm
Diameter: 3mm

This product is regularly purchased with the above pointed out product.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 18mm
Diameter: 3mm

This product compliments the above talked about product.



Secure soft wood from "pull-through" screws and your hardware from rust with
Excellent Planes' Zinc-plated washers. The washers feature a large surface area
that spreads holding power to more material, letting you tighten screws down
without harming the surface area underneath. The special Zinc plating keeps them
rust and corrosion-free, for simple setup and removal.

INCLUDES:
Eight #4 Flat Washers and comes in a reusable plastic parts load

SPECIFICATIONS:
Inside Diameter: .130" (3.3mm)
Outdoors Diameter: .314" (7.9mm)

You will enjoy this item if you have the item earlier pointed out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Get this product to boost the one you read around.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to car

SPECIFICATIONS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

COMMENTS:
These bearings are utilized to support the Primary Clutch (one required).

This product compliments the main item below.



Great Planes Socket Head Screws feature a rust resistant zinc alloy plating.
This plating resists deterioration keeping the screws in top notch condition year
after year. The screws are available in many sizes for most modeling applications.

FEATURES:
The screws feature an unique zinc plating that resist deterioration

INCLUDES:
The screws come 4 per bundle and can be found in an unique recyclable plastic
    Components Pak that can hang neatly on a peg board or in a field box.

SPECS:
4-40 x ½" socket head cap screw

NEEDS:
3/32" hex wrench (GPMR8002) KPM 10/25/93

Frequently purchased with the product that you are presently reading about.

3.0Mm X 20 Socket Head Cap Screws (4/Pkg)

These are 3x20mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

INCLUDES:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 20mm
Diameter: 3mm