Dubro 2.5Mm X 8 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for locations where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
come in a variety of sizes and lengths. This utilizes a 2.5mm balldriver
(BONR1110).

Want one more fantastic item to compliment the above stated item?

2.5Mm X 6 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for locations where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
come in a variety of sizes and lengths. This utilizes a 2.5mm balldriver
(BONR1110).

Get this item to boost the one you are reading about.

2.5Mm X 15 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for locations where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
come in a variety of sizes and lengths. This utilizes a 2.5mm balldriver
(BONR1110).

This item praises the above gone over item.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Car Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.
These are created for use on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Size: 2.5mm

This is a fantastic enhancement to the item currently being gone over.



Secure soft wood from "pull-through" screws and your hardware from rust with
Excellent Aircrafts' Zinc-plated washers. The washers include a large surface area
that spreads holding power to more product, letting you tighten up screws down
without damaging the surface area below. The unique Zinc plating keeps them
rust and corrosion-free, for easy setup and removal.

INCLUDES:
Eight #2 Flat Washers and comes in a recyclable plastic parts load

SPECIFICATIONS:
Inside Size: .095" (2.4mm)
Outside Size: .220" (5.5mm)

Often acquired with the item that you are currently checking out.



The Leading Flite balancer is an ingenious method to stabilize your aircraft or boat
propellers, spinner backplates, vehicle wheels and tires, as well as numerous other
products in the hobby industry.

FEATURES:
Precision ground balancing shaft, held between 2 powerful
    "Ceramic 8" magnets allows shaft to "float" for optimum level of sensitivity
Affordable and easy to use...vital for each modeler.
Reduces prop vibration-reducing engine wear and prevents
    structural damage
Can be used anywhere-on the workbench or at the field
Constructed of lasting, high impact plastic and Nickel steel
Includes directions describing the best ways to fix out-of-balance props,
    as well as the best ways to use the balancer to figure out wind speed.
Can also be used to stabilize boat props, vehicle wheels and tires,
    ducted fans, spinners, nose weights and more!
Balances approximately 24" propellers and any size wheels and tires.

INCLUDES:
2 Ceramic Magnets (GP# METAL058)
2 Molded Plastic Side Plates (GP# NYLON92)
2 Metal Rods for Base Assistance (GP# WIRES81)
One Balancing Shaft (TOPQ5701) or (GP# WIRES80)
2 Plastic Propeller Locking Cones (TOPQ5702)
2 Lexan Magnet Covers (GP# PSDC001)
2 Thumb Screws (GP# SCRW102) .

NEEDS:
CA to glue Lexan magnet covers to magnets.

SPECS:
Transport size: 2-1/8" x 7-1/8" x 1-5/16"
Put together size: 2-1/8" x 7-1/8" x 7-3/8"

REMARKS:
Balancer is VERY sensitive, VERY precise.