Dubro Rod Ends Steel 4-40 (2)

This is a Rod End set by Dubro.
These rods work well as tail bracing, flying wires, aileron adapters
on biplanes, strut bracing, and anywhere a solid wire connection
is needed.

FEATURES:
Strong steel building and construction
Steel threaded fork for easy adjustments.
Overall length adjustment by crimping wire where desired.
Full mounting hardware included.

INCLUDES:
Two 12"x4-40 steel rods
Four fork rod ends
Four mounting straps
Four 4-40x1/4" screws
Four 4-40 nuts

SPECS:
Rod length: 304mm (12")
Rod size: 2.2mm (.088")
Strap length: 40.7mm (1.602")
Strap width: 6.5mm (.259")
Strap thickness: 1.6mm (.065")

COMMENTS:
One end of each steel wire includes a threaded fork formed coupler.
    The other end has a coupler that will move up and down the wire,
    following the guidelines, if you crimp completion of the wire at
    your wanted position, you can cut off the excess, and adjust
    the length.