Dubro Mini-Ny Steel Pushrod Assembly

This is a Light-weight pushrod assembly suitable for 1/2A applications. The
assembly includes a plastic external tube, steel pushrods, plastic clevis'
and spring threads.

Includes: 2- steel pushrods
2- plastic pushrod covers
4- little plastic clevis'
4- steel spring threads (these are soldered to the wire as threads)

Requirements: Rod length 19" rod size 1/32"
Plastic tube 16" tube inner dia. 1/16" external dia.1/8"

Want an additional fantastic item to match the above pointed out item?

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon construction

INCLUDES:
2 control horns w/4 adjusting holes and 2 mounting holes
(3/4" long [tall])
2 mounting plates w/2 mounting holes (3/8"x3/8")
4 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

This item compliments the above talked about item.

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon construction decreases turning mass for
    greater output and longer life.
Reinforcing carbon fibers assist maintain true, constant pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring instruction sheet

REQUIRES:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 8"
Pitch: 3.8

REMARKS:
Slo-Flyer props are Not developed for Glow engines

Right here is an additional item that compliments the item being talked about.

Hs-55 Sub Micro Servo, .14Sec/18Oz @ 6.0V

    This is the Hitec HS-55 Sub Micro (Plume) Servo with a
Futaba J, Hitec S, JR, Airtronics Z-type Connector.

FEATURES:
Extremely slim case and light-weight for mounting in little airplanes,
    electrics or gliders, where extremely high speed and great torque are
    critical.
One of the slimmest micro servos available.
High-strength resin gear train offers reliable operation.

INCLUDES:
One HS-55 Servo w/pre-installed little X-shaped servo horn and screw
One extremely little straight servo horn
One M1.7x3 servo horn screw
One little straight servo horn
2 M1.7x7 servo mounting screws

at 4.8V
SPECS:
Speed: 0.17 sec at 60°
Output Torque: 15.27 oz-in (1.1 kg-cm)
Weight: 0.27oz (7.8g)
Length: 0.89" (22.8mm)
Width: 0.45" (11.6mm)
Height: 0.94" (24mm)

This item compliments the main item right here.

Hyperion Light Y connector 7

Universal, High-Quality Servo LIGHT WIRE Y-CONNECTOR with Gold Pins-Sockets-180mm
These are the brand-new "Light" cable televisions for little models, where conserving every gram counts. Hyperion Servo Connectors are made in Korea to the highest standards, and contacts are plated with quality gold. Your design depending on those servos, so get great cable televisions! They are "universal", implying that any Male servo adapter will fit the Futaba-style Female on the Hyperion cable television, and any Female servo adapter will fit the JR-type Male end. Wires are 0.15qmm (~25 AWG) 30 hair

When referring to Male and Female, we are speaking about the Plastic Covers - not the metal ports inside!