Dubro Mini-Ny Steel Pushrod Assembly

This is a Light-weight pushrod assembly perfect for 1/2A applications. The
assembly includes a plastic outer tube, steel pushrods, plastic clevis'
and spring threads.

Includes: 2- steel pushrods
2- plastic pushrod covers
4- small plastic clevis'
4- steel spring threads (these are soldered to the wire as threads)

Requirements: Rod length 19" rod size 1/32"
Plastic tube 16" tube inner dia. 1/16" outer dia.1/8"

Want another wonderful thing to compliment the above pointed out thing?

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building and construction

INCLUDES:
Two control horns w/4 changing holes and 2 installing holes
(3/4" long [tall])
Two installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

This thing praises the above discussed thing.

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction reduces turning mass for
    higher output and longer life.
Reinforcing carbon fibers help preserve real, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of small shaft locating rings
One locating ring guideline sheet

REQUIRES:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 8"
Pitch: 3.8

REMARKS:
Slo-Flyer props are Not designed for Glow engines

Right here is another thing that praises the thing being discussed.

Hs-55 Sub Micro Servo, .14Sec/18Oz @ 6.0V

    This is the Hitec HS-55 Sub Micro (Plume) Servo with a
Futaba J, Hitec S, JR, Airtronics Z-type Connector.

FEATURES:
Extremely slim case and lightweight for installing in small aircrafts,
    electrics or gliders, where really high speed and good torque are
    critical.
One of the slimmest micro servos available.
High-strength resin gear train provides reliable operation.

INCLUDES:
One HS-55 Servo w/pre-installed small X-shaped servo horn and screw
One really small straight servo horn
One M1.7x3 servo horn screw
One small straight servo horn
Two M1.7x7 servo installing screws

at 4.8V
SPECIFICATIONS:
Speed: 0.17 sec at 60°
Output Torque: 15.27 oz-in (1.1 kg-cm)
Weight: 0.27oz (7.8g)
Length: 0.89" (22.8mm)
Width: 0.45" (11.6mm)
Height: 0.94" (24mm)

This thing praises the main item here.

Hyperion Light Y connector 7

Universal, High-Quality Servo LIGHT WIRE Y-CONNECTOR with Gold Pins-Sockets-180mm
These are the brand-new "Light" cables for small designs, where saving every gram counts. Hyperion Servo Connectors are made in Korea to the greatest standards, and contacts are plated with quality gold. Your design depending upon those servos, so get good cables! They are "universal", implying that any Male servo connector will fit the Futaba-style Female on the Hyperion cable, and any Female servo connector will fit the JR-type Male end. Wires are 0.15qmm (~25 AWG) 30 strand

When referring to Male and Female, we are discussing the Plastic Covers - not the metal ports inside!