Dubro Mini Nylon Hinges-6 Pack

These are Little Nylon Hinges

FEATURES:
Nylon building and construction w/steel hinge pin

INCLUDES:
6 hinges

SPECS:
7/16"x1-1/8" overall unfolded length

REMARKS:
Precision molded, inspected and put together with secured hinge pin.
Easy to set up. Hinges have 6 holes on each side for optimum
holding power.

You will certainly love this product if you have the product above mentioned.



This thing praises the main item here.



This thing praises the above discussed thing.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building and construction

INCLUDES:
2 control horns w/4 adjusting holes and 2 mounting holes
(3/4" long [high])
2 mounting plates w/2 mounting holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "consists of" above

Frequently acquired with the thing that you are currently checking out.

T-Style Nylon Control Horns 2Pc

These are T-Style Nylon Control Horns.

FEATURES:
Nylon building and construction

INCLUDES:
2 control horns w/5 adjusting holes and 2 mounting holes
(1-1/8" long [high])
2 mounting plates w/2 mounting holes (1/2"x1/2")
4 2-56x5/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "consists of" above

Below is an additional thing that praises the thing being discussed.

Horn Bracket 4-40 3/32"

These are 3/32" EZ Change Horn Brackets for 4-40 Threads

FEATURES:
Nylon building and construction

INCLUDES:
4 horn brackets

NEEDS:
A rod with 4-40 threads

This thing praises the above discussed thing.

Kwik-Hinge Slotter

This is a Hinge Slotter Set from Dubro.

FEATURES:
Takes the inconvenience from slotting control surfaces for gluing hinges.
The centering/parallel guide, focuses hinge slotter on up to 3/4"
    (19mm) material.
Four handle set plus guide and centering tool for three various
    size slotting forks: mini, conventional and heavy responsibility hinges.
Designed to work with all Dubro hinges.
The 3 slotters and the picker are permanently installed to red nylon
    handles.

INCLUDES:
One Hinge Slotter Set.

Frequently acquired with the thing that you are currently checking out.



This is the Midwest .210" Diameter 40" Carbon Fiber Tube.

FEATURES:
Perfect for slipping over a pushrod to increase strength and rigidness
Constructed utilizing several layers of unidirectional carbon covered
    on a mandrel and treated
40% lighter than aluminum

INCLUDES:
One Midwest .210" Diameter 40" Carbon Fiber Tube

NEEDS:
Cutting (abrasive cut-off wheel suggested) depending upon application

SPECS:
Length: 40" (1016mm)
Outer Diameter: .210" (5.3mm)
Inner Diameter: .132"
Weight: 0.018oz (.520g) per inch

REMARKS:
When cutting carbon fiber, avoid side cutters as these can crush the
    rods and separate fibers. Constantly use security goggles and gloves
    when cutting or sanding carbon fiber.

This thing is often acquired with the above discussed thing.



This is a fantastic enhancement to the thing currently being discussed.



This is a great variety of clevises for attaching your pushrod wires to
servo arms, control horns, throttle arms and bellcranks.

INCLUDES:
4 solder clevises for upto .074" diameter wire
4 2-56 nylon clevises
4 2-56 threaded steel clevises
Twelve silicone tube retainers

FEATURES:
Great Planes 1-year guarantee

NEEDS:
2-56 size pushrod
Solder for the solder clevises