Dubro Mini Nylon Hinges-6 Pack

These are Small Nylon Hinges

FEATURES:
Nylon building w/steel hinge pin

CONSISTS OF:
6 hinges

SPECIFICATIONS:
7/16"x1-1/8" total unfolded length

COMMENTS:
Accuracy molded, checked and assembled with locked in hinge pin.
Easy to set up. Hinges have six holes on each side for optimum
holding power.

You will certainly like this item if you have the item just above stated.



This product compliments the main item here.



This product compliments the above discussed product.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

CONSISTS OF:
2 control horns w/4 changing holes and 2 installing holes
(3/4" long [high])
2 installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

Regularly gotten with the product that you are currently checking out.

T-Style Nylon Control Horns 2Pc

These are T-Style Nylon Control Horns.

FEATURES:
Nylon building

CONSISTS OF:
2 control horns w/5 changing holes and 2 installing holes
(1-1/8" long [high])
2 installing plates w/2 installing holes (1/2"x1/2")
4 2-56x5/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

Below is one more product that compliments the product being discussed.

Horn Bracket 4-40 3/32"

These are 3/32" EZ Change Horn Brackets for 4-40 Threads

FEATURES:
Nylon building

CONSISTS OF:
4 horn brackets

NEEDS:
A rod with 4-40 threads

This product compliments the above discussed product.

Kwik-Hinge Slotter

This is a Hinge Slotter Kit from Dubro.

FEATURES:
Takes the inconvenience from slotting control surfaces for gluing hinges.
The centering/parallel guide, focuses hinge slotter on approximately 3/4"
    (19mm) material.
Four manage set plus guide and centering tool for 3 various
    size slotting forks: mini, standard and heavy responsibility hinges.
Designed to work with all Dubro hinges.
The 3 slotters and the picker are permanently installed to red nylon
    handles.

INCLUDES:
One Hinge Slotter Kit.

Regularly gotten with the product that you are currently checking out.



This is the Midwest .210" Size 40" Carbon Fiber Tube.

FEATURES:
Suitable for slipping over a pushrod to increase strength and rigidity
Built utilizing numerous layers of unidirectional carbon covered
    on a mandrel and cured
40% lighter than aluminum

CONSISTS OF:
One Midwest .210" Size 40" Carbon Fiber Tube

NEEDS:
Cutting (abrasive cut-off wheel suggested) depending on application

SPECIFICATIONS:
Length: 40" (1016mm)
Outer Size: .210" (5.3mm)
Inner Size: .132"
Weight: 0.018oz (.520g) per inch

COMMENTS:
When cutting carbon fiber, prevent side cutters as these can crush the
    rods and separate fibers. Always use security goggles and gloves
    when cutting or sanding carbon fiber.

This product is frequently gotten with the above mentioned product.



This is a superb enhancement to the product currently being discussed.



This is a excellent assortment of clevises for connecting your pushrod wires to
servo arms, control horns, throttle arms and bellcranks.

INCLUDES:
4 solder clevises for upto .074" diameter wire
4 2-56 nylon clevises
4 2-56 threaded steel clevises
Twelve silicone tube retainers

FEATURES:
Great Planes 1-year warranty

NEEDS:
2-56 size pushrod
Solder for the solder clevises