Dubro 5Pc Metric Ball Wrench Set 1.5, 2.0, 2.5, 3.0 & 4.0Mm

    This is a 5 Piece Metric Ball Wrench Set from Dubro.

FEATURES:
The ideal tool for getting at those hard to reach places.
Ball wrenches make it possible to turn socket head screws or bolts
    from any angle.
Transparent Red plastic handles

CONSISTS OF:
Five Ball Wrenches:
    1.5mm (2.0mm socket head)
    2.0mm (2.5mm socket head)
    2.5mm (3.0mm socket head)
    3.0mm (4.0mm socket head)
    4.0mm (5.0mm socket head)

Get this item to boost the one you are reading around.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FUNCTIONS:
Fiberglass Construction

CONSISTS OF:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

COMMENTS:
None

Lots of others have actually purchased this item in addition to the item that you are currently reading about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building and construction, green in color

CONSISTS OF:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

Here is a wonderful item that many others have actually purchased the very same time.

Heavy Duty Camber Link, For Traxxas E-Rustler & Stampede 2Wd

These are Heavy Responsibility Camber Links for the Traxxas Rustler & Stampede.

FEATURES:
One Piece Molded Nylon
Black in Color

CONSISTS OF:
4 Strong Camber Links

NEEDS:
Traxxas Rustler or Stampede

SPECS:
Length: 3.55" (for the (2) longer links)
Width: .320" (for the (2) longer links)
Lenght: 3.062" (for the (2) much shorter links)
Width: .320" (for the (2) much shorter links)

COMMENTS:
Factory Number is #81262

Here is a wonderful item that many others have actually purchased the very same time.

New Landing Skid/Yellow (T-Rex 600)

This is an upgrade landing skid set for the Align 600 and 600N line of
helicopters. More rigid than the conventional landing gear these have a
reduced height for a lower center of mass better for 3D
flying and a brilliant yellow color to inhance the looks of your T-Rex 600. They likewise include presence to help keep orientation throughout flight.
Plan consists of:

 2 - Yellow landing skids 39g each




Here is one more item that compliments the item being gone over.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is ideal for all electronic applications.