Dubro 3X8mm Flat Head Socket Screws (4)

These are Countersunk Machine Screws by Dubro.

FEATURES:
Black metal building

INCLUDES:
Four hex head 3.0x8mm screws

NEEDS:
2mm hex wrench, GPMR8011

Lots of others have actually bought this thing together with the thing that you are presently reviewing.

Flat Head Socket Screw 3.0mmx6 (4)

This is a package of 4 Dubro Flat Head Hex Screws for basic application.

FEATURES:
Black steel building

INCLUDES:
Four 3x6mm flat head hex screws

NEEDS:
Tightening up with a 2.0mm allen secret

Here is a excellent thing that lots of others have actually purchased the same time.

3.0Mmx10 Flat Head Socket Screws, 4/Pkg

These are Countersunk Machine Hex Head Screws by Dubro.

FEATURES:
Black metal building

INCLUDES:
Four 3.0x10mm screws

NEEDS:
2mm hex wrench, GPMR8011

You will love this item if you have the item just above stated.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the above discussed thing.

3.0Mm X 10 Socket Head Cap Screws (4/Pkg)

These are 3x10mm Socket Head Cap Screws.

FEATURES:
Steel building

INCLUDES:
Four screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 10mm
Size: 3mm

This thing praises the above discussed thing.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel building

INCLUDES:
Four screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 18mm
Size: 3mm

This is a great enhancement to the thing presently being discussed.

3.0Mm X 30 Socket Head Cap Screws (4/Pkg)

These are 3x30mm Socket Head Cap Screws.

FEATURES:
Steel building

INCLUDES:
Four screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 30mm
Size: 3mm

Here is an additional thing that praises the thing being discussed.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Vehicle Line (Metric).

FUNCTIONS:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECIFICATIONS:
Size: 3mm

Want an additional excellent thing to enhance the above stated thing?



This is a 6x5.5E Thin Composite Propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for radiance engines).

FUNCTIONS:
Gray composite building

INCLUDES:
One 6x5.5E Thin Electric Propeller

NEEDS:
ALL props require balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 6"
Pitch: 5.5
Center inner diameter: 0.25"

Regularly bought with the thing that you are presently reviewing.



These are the 4x3x6mm Grey Spacers from Axial
for the Scorpion Rock Crawler.

FEATURES:
Aluminum building, grey in color

INCLUDES:
Six 4x3x6mm spacers

NEEDS:
Installation

SPECIFICATIONS:
Length: .16" (4mm)
Outer diameter: .23" (6mm)
Inner diameter: .11" (3mm)

Get this thing to enhance the one you are reading around.

1400Kv Brushless Outrunner, Long Shaft

PLEASE KEEP IN MIND: Prop adapter not included.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for planes as much as 220 grams (8 oz) using 2 li-poly cells. Really lightweight at 19 grams consisting of integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall software install. Great for small 3D planes weighing around 6 oz, or aerobatic planes as much as 8 oz. Usage with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm hardened steel shaft, double ball bearings, integral prop saver for APC E props and integral firewall software install flange. Keep in mind that the prop saver is sized for APC props. GWS props will require some adjustment to fit correctly. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. efficiency current: 2-6 Amp
NoLoad current / 0.3 Amp
Current capability: 7.5 A/60 s
Max. Effectiveness: 74%
Weight with cable televisions: 19g
Measurements (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5