Dubro 3X8mm Flat Head Socket Screws (4)

These are Countersunk Machine Screws by Dubro.

FEATURES:
Black metal building and construction

CONSISTS OF:
Four hex head 3.0x8mm screws

REQUIRES:
2mm hex wrench, GPMR8011

Several others have gotten this thing along with the thing that you are currently reviewing.

Flat Head Socket Screw 3.0mmx6 (4)

This is a bundle of 4 Dubro Flat Head Hex Screws for basic application.

FEATURES:
Black steel building and construction

CONSISTS OF:
Four 3x6mm flat head hex screws

REQUIRES:
Tightening with a 2.0mm allen secret

Here is a fantastic thing that many others have purchased the exact same time.

3.0Mmx10 Flat Head Socket Screws, 4/Pkg

These are Countersunk Machine Hex Head Screws by Dubro.

FEATURES:
Black metal building and construction

CONSISTS OF:
Four 3.0x10mm screws

REQUIRES:
2mm hex wrench, GPMR8011

You will like this product if you have the product just above mentioned.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the above discussed thing.

3.0Mm X 10 Socket Head Cap Screws (4/Pkg)

These are 3x10mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECS:
Length: 10mm
Size: 3mm

This thing compliments the above discussed thing.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECS:
Length: 18mm
Size: 3mm

This is a fantastic enhancement to the thing currently being discussed.

3.0Mm X 30 Socket Head Cap Screws (4/Pkg)

These are 3x30mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECS:
Length: 30mm
Size: 3mm

Here is one more thing that compliments the thing being discussed.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Vehicle Line (Metric).

FEATURES:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECS:
Size: 3mm

Want one more fantastic thing to match the above mentioned thing?



This is a 6x5.5E Thin Composite Propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite building and construction

CONSISTS OF:
One 6x5.5E Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is CRUCIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 6"
Pitch: 5.5
Center inner diameter: 0.25"

Often gotten with the thing that you are currently reviewing.



These are the 4x3x6mm Grey Spacers from Axial
for the Scorpion Rock Crawler.

FEATURES:
Aluminum building and construction, grey in color

CONSISTS OF:
Six 4x3x6mm spacers

REQUIRES:
Setup

SPECS:
Length: .16" (4mm)
Outer diameter: .23" (6mm)
Inner diameter: .11" (3mm)

Get this thing to enhance the one you read around.

1400Kv Brushless Outrunner, Long Shaft

PLEASE KEEP IN MIND: Prop adapter not included.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An exceptional motor for aircrafts approximately 220 grams (8 oz) using 2 li-poly cells. Very lightweight at 19 grams including essential prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and essential firewall software mount. Great for small 3D aircrafts weighing around 6 oz, or aerobatic aircrafts approximately 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor includes a 3mm hardened steel shaft, dual ball bearings, essential prop saver for APC E props and essential firewall software mount flange. Note that the prop saver is sized for APC props. GWS props will need some adjustment to fit properly. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. efficiency present: 2-6 Amp
NoLoad current / 0.3 Amp
Current capability: 7.5 A/60 s
Max. Performance: 74%
Weight with cable televisions: 19g
Measurements (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5