Dubro 3X14mm Flat Head Socket Screws (4)

These are Countersunk Maker Hex Head Screws by Dubro

FEATURES:
Black metal building

CONSISTS OF:
Four 3.0x14mm screws

NEEDS:
2mm hex wrench, GPMR8011

Get this product to enhance the one you are reading about.

3X12mm Flat Head Socket Screws (4)

These are Countersunk Maker Hex Head Screws by Dubro

FEATURES:
Black metal building

CONSISTS OF:
Four 3.0x12mm screws

NEEDS:
2mm hex wrench, GPMR8011

This product is regularly gotten with the above stated product.

3.0Mmx10 Flat Head Socket Screws, 4/Pkg

These are Countersunk Maker Hex Head Screws by Dubro.

FEATURES:
Black metal building

CONSISTS OF:
Four 3.0x10mm screws

NEEDS:
2mm hex wrench, GPMR8011

Right here is a wonderful product that lots of others have actually purchased the exact same time.

3.0Mm X 20 Socket Head Cap Screws (4/Pkg)

These are 3x20mm Socket Head Cap Screws.

FEATURES:
Steel building

CONSISTS OF:
Four screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 20mm
Size: 3mm

Want one more wonderful product to enhance the above stated product?

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Car Line (Metric).

FEATURES:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECIFICATIONS:
Size: 3mm

This product is regularly gotten with the above stated product.



These are the Axial M3x20mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
Ten M3 x 20mm screws

NEEDS:
Setup on automobile

REMARKS:
Can be used where ever this size screw is needed

Right here is one more product that praises the product being talked about.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on automobile

This product is regularly gotten with the above stated product.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is also referred to as a JST connector.

FEATURES:
Created for use with a lot of Park Flyer ElectriFly electronic devices
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality period

CONSISTS OF:
Two Female 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECIFICATIONS:
Plug Size-
    Length: 19mm (overall)
    Width: 7mm
    Height: 4mm

REMARKS:
For the male adapters with wire, use GPMM3106.
This connector can be used to change BEC-type adapters.

This is a fantastic addition to the product currently being talked about.

3X8mm Flat Head Socket Screws (4)

These are Countersunk Maker Screws by Dubro.

FEATURES:
Black metal building

CONSISTS OF:
Four hex head 3.0x8mm screws

NEEDS:
2mm hex wrench, GPMR8011