Dubro T-Style Nylon Control Horns 2Pc

These are T-Style Nylon Control Horns.

FEATURES:
Nylon building and construction

INCLUDES:
Two control horns w/5 adjusting holes and 2 mounting holes
(1-1/8" long [tall])
Two mounting plates w/2 mounting holes (1/2"x1/2")
Four 2-56x5/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

Regularly bought with the product that you are currently checking out.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building and construction

INCLUDES:
Two control horns w/4 adjusting holes and 2 mounting holes
(3/4" long [tall])
Two mounting plates w/2 mounting holes (3/8"x3/8")
Four 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

Want an additional excellent product to compliment the above stated product?

Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod building and construction w/ 2-56 threads
Nylon clevis building and construction

INCLUDES:
5 steel threaded rods 12" long, thread length 3/4", .072" size
5 2-56 nylon clevises 7/8" long

SPECIFICATIONS:
See "Includes" above

REMARKS:
For bulk qty of 12, use DUBQ1580.

This product praises the main item right here.

12" Rods With St Kwik Link

These are Threaded Rods with Kwik Links.

FEATURES:
Steel building and construction

INCLUDES:
5 steel threaded rods 12" long, thread length 3/4", .072" size
5 2-56 steel clevises 1" long

SPECIFICATIONS:
See "Includes" above

REMARKS:
For bulk qty of 12, utilize DUBQ1550.

You will certainly love this product if you have the product earlier discussed.



Developed for use with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
3 male bullet adapters

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .47" (12mm)
Size: .14" (3.5mm) outside

REMARKS:
For the 3.5mm female port order GPMM3113

This is a wonderful addition to the product currently being gone over.

Gold Plated Bullet Connector Female 3.5mm (3)

Developed for use with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Port Female from Fantastic Planes.

FEATURES:
Gold plated
Fits wire size approximately 3.5mm

INCLUDES:
3 female bullet adapters

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .51" (13mm)
Size: .14" (3.5mm) inside (where the wire is soldered to)
Size: .17" (4.25mm) outside

REMARKS:
For the 3.5mm male port order GPMM3112

The below product likewise pairs really well with the product being gone over.



This is an excellent selection of clevises for attaching your pushrod wires to
servo arms, control horns, throttle arms and bellcranks.

INCLUDES:
Four solder clevises for upto .074" size wire
Four 2-56 nylon clevises
Four 2-56 threaded steel clevises
Twelve silicone tube retainers

FUNCTIONS:
Great Planes 1-year service warranty

NEEDS:
2-56 size pushrod
Solder for the solder clevises

This is a wonderful addition to the product currently being gone over.

E-Z Connector For Rod Or Cable

This is an EZ Port set by Dubro.
EZ Connectors connect a pushrod to a servo arm permitting it to pivot for
less going in control surfaces.

FEATURES:
Works on 2-56 and smaller sized wire (.078")
Permanent or snap on mounting push nuts both included.

INCLUDES:
Two brass EZ Connectors
Two plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.

REQUIRES:
Assembly onto linkages

SPECIFICATIONS:
Length of brass port: 10mm (.395")
Size of brass port: 5.5mm (.217")