Dubro Nylon Control Horns Left & Right

These are L-Style Nylon Control Horns.
One Right & One Left Control Horn.

FEATURES:
Nylon building

CONSISTS OF:
One right control horn w/4 changing holes and 2 installing holes *
One left control horn w/4 changing holes and 2 installing holes *
*(1-1/8" long [high])
Two installing plates w/2 installing holes (5/8"x1/4")
4 2-56x5/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

This item compliments the above reviewed item.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

CONSISTS OF:
Two control horns w/4 changing holes and 2 installing holes
(3/4" long [high])
Two installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

This item is often gotten with the above mentioned item.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Measurement : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with devices)

You will love this product if you have the product previously stated.

900Mm Light Extension Cable (Jr)

HYPERION 900MM LIGHT EXTENSION CABLE (JR)

Below is a great item that numerous others have actually purchased the same time.



The Nylon Hinges are used to connect control surfaces to the aircraft, such
as the trailing edge of surface and the leading edge of control surface.

INCLUDES:
6 Medium Pinned Hinges (White)

INCLUDES:
The specifically textured nylon assists quick setting CAs or epoxy get
    a strong grip for fast long lasting bonds.
It is shaped to insure bond strength at (3) crucial points:
    1- At the edges
    2- On the surfaces
    3- Through holes
Unique roughened plastic product designed to be installed with
    CA or Epoxy. .

DIMENSIONS:
Aprox. 1"L x 3/4"W.

COMMENTS:
Client will need to buy the epoxy or CA individually. 4/20/96sk

Want another great item to enhance the above mentioned item?

E/Z Connector For Rod Or Cable, 12/Pkg

Bulk replacement EZ Connectors by DuBro.

PACKAGE
CONSISTS OF:
12-EZ Connectors (brass)
12-Retainers (snap onto the bottom of the EZ Connector)
12-Washers (gray metal)
12-Socket Head Screws (assist hold the pushrod wire in place)

INCLUDES:
Brass connector is round with pre-drilled center hole
Black nylon retainers

SPECIFICATIONS:
Screws: 1/8"
Washers: 7/32"
7/26/94sk