Dubro Micro Control Horns

This is the Micro-Control Horn
From Du-Bro for the Park Flyers

FEATURES:
These are made from Plastic.
Three Holes for Change
INCLUDES:
2 (2) Control Horns

NEEDS:
Park Flyer or a Little Indoor Aircraft

SPECS:
Length: 1/2" (13mm)
Width: 1/4" (6mm)
Height: 1/16"(3mm)

REMARKS:
For usage on the Park Flyer or a Little Indoor Aircraft!

This product praises the main item right here.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
2 control horns w/4 changing holes and 2 installing holes
(3/4" long [tall])
2 installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "consists of" above

You will enjoy this product if you have the product earlier mentioned.

Micro Pushrod Guide 4/Pkg

These are Micro Pushrod Guides by Dubro.
Holds and guides the pushrods.

FEATURES:
White nylon Plastic building

INCLUDES:
(4) Pushrod Guides

NEEDS:
Installation

SPECS:
Length: 1.07" (27.1mm)

The listed below product additionally sets really well with the product being gone over.

E/Z Connector For Rod Or Cable, 12/Pkg

Bulk replacement EZ Connectors by DuBro.

PACKAGE
INCLUDES:
12-EZ Adapters (brass)
12-Retainers (snap onto the bottom of the EZ Connector)
12-Washers (gray metal)
12-Socket Head Screws (help hold the pushrod wire in location)

INCLUDES:
Brass adapter is round with pre-drilled center hole
Black nylon retainers

SPECS:
Screws: 1/8"
Washers: 7/32"
7/26/94sk