Dubro Micro Control Horns

This is the Micro-Control Horn
From Du-Bro for the Park Flyers

FUNCTIONS:
These are made of Plastic.
Three Holes for Modification
INCLUDES:
2 (2) Control Horns

REQUIRES:
Park Flyer or a Small Indoor Aircraft

SPECIFICATIONS:
Length: 1/2" (13mm)
Width: 1/4" (6mm)
Height: 1/16"(3mm)

COMMENTS:
For use on the Park Flyer or a Small Indoor Aircraft!

This item praises the main item here.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
2 control horns w/4 adjusting holes and 2 installing holes
(3/4" long [tall])
2 installing plates w/2 installing holes (3/8"x3/8")
Four 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

You will certainly love this thing if you have the thing just above stated.

Micro Pushrod Guide 4/Pkg

These are Micro Pushrod Guides by Dubro.
Holds and guides the pushrods.

FEATURES:
White nylon Plastic building

INCLUDES:
(4) Pushrod Guides

REQUIRES:
Setup

SPECIFICATIONS:
Length: 1.07" (27.1mm)

The listed below item likewise sets actually well with the item being discussed.

E/Z Connector For Rod Or Cable, 12/Pkg

Bulk replacement EZ Connectors by DuBro.

PACKAGE
INCLUDES:
12-EZ Ports (brass)
12-Retainers (snap onto the bottom of the EZ Connector)
12-Washers (gray metal)
12-Socket Head Screws (assist hold the pushrod wire in place)

FEATURES:
Brass port is round with pre-drilled center hole
Black nylon retainers

SPECIFICATIONS:
Screws: 1/8"
Washers: 7/32"
7/26/94sk