Dubro 3Mm Steel Hex Nuts-Metric

    These are 3mm Hex Nuts from Du-Bro's Automobile Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.
These are designed for use on R/C cars.

INCLUDES:
(4) Nuts

SPECS:
Diameter: 3.0mm

This is a wonderful enhancement to the item presently being gone over.

3.0Mm X 6 Socket Head Cap Screws (4/Pkg)

These are 3x6mm Socket Head Cap Screws

FUNCTIONS:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECS:
Length: 6mm
Diameter: 3mm

You will certainly like this item if you have the item earlier stated.

3.0Mm X 30 Socket Head Cap Screws (4/Pkg)

These are 3x30mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECS:
Length: 30mm
Diameter: 3mm

This item praises the above gone over item.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECS:
Length: 18mm
Diameter: 3mm

This item is regularly gotten with the above mentioned item.

3.0Mm X 50 Socket Head Cap Screws, 4/Pkg

This is a plan of 4 Dubro Socket Head Cap Screws for general application.

FEATURES:
Black steel building and construction

CONSISTS OF:
Four 3x50mm socket head cap screws

REQUIRES:
Tightening up with a 2.5mm allen secret

Right here is a terrific item that numerous others have actually purchased the same time.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Automobile Line (Metric).

FUNCTIONS:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECS:
Diameter: 3mm

Get this item to improve the one you are reading about.

2Mm Steel Hex Nuts-Metric

    These are 2mm Hex Nuts from Du-Bro's Automobile Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.

INCLUDES:
(4) Nuts

SPECS:
Diameter: 2.0mm

Get this item to improve the one you are reading about.

Prop Adapter with Collet, 3mm


Tech Notes


Use on motors with 3mm size output shafts.
Collet threads are 4.5mm in size.











Right here is a terrific item that numerous others have actually purchased the same time.

11x6 Sport Propeller

This is a 11x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction lowers turning mass for
    higher output and longer life.
Reinforcing carbon fibers help maintain true, consistent pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is ESSENTIAL, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 11" Pitch: 6
Density at hub: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" mean the production run in which this prop was made.

Get this item to improve the one you are reading about.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with two adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One direction sheet

REQUIRES:
Assembly onto motor or gear drive system in your Electric plane.
Balancing

SPECS:
Diameter: 6"
Pitch: 4
Center inner size: 0.25"

COMMENTS:
Use Speed 400 Electric motors.