Dubro 3Mm Steel Hex Nuts-Metric

    These are 3mm Hex Nuts from Du-Bro's Vehicle Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.
These are created for use on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 3.0mm

This is a great addition to the thing currently being talked about.

3.0Mm X 6 Socket Head Cap Screws (4/Pkg)

These are 3x6mm Socket Head Cap Screws

FUNCTIONS:
Steel building and construction

CONSISTS OF:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 6mm
Diameter: 3mm

You will enjoy this item if you have the item above stated.

3.0Mm X 30 Socket Head Cap Screws (4/Pkg)

These are 3x30mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 30mm
Diameter: 3mm

This thing praises the above talked about thing.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
4 screws

NEEDS:
2.5mm allen wrench

SPECIFICATIONS:
Length: 18mm
Diameter: 3mm

This thing is often gotten with the above mentioned thing.

3.0Mm X 50 Socket Head Cap Screws, 4/Pkg

This is a bundle of 4 Dubro Socket Head Cap Screws for basic application.

FEATURES:
Black steel building and construction

CONSISTS OF:
4 3x50mm socket head cap screws

NEEDS:
Tightening up with a 2.5mm allen secret

Here is a fantastic thing that many others have actually bought at the very same time.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Vehicle Line (Metric).

FUNCTIONS:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECIFICATIONS:
Diameter: 3mm

Get this thing to boost the one you read about.

2Mm Steel Hex Nuts-Metric

    These are 2mm Hex Nuts from Du-Bro's Vehicle Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 2.0mm

Get this thing to boost the one you read about.

Prop Adapter with Collet, 3mm


Tech Notes


Use on motors with 3mm diameter output shafts.
Collet threads are 4.5mm in diameter.











Here is a fantastic thing that many others have actually bought at the very same time.

11x6 Sport Propeller

This is a 11x6 Plane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design provides these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon building and construction decreases rotating mass for
    higher output and longer life.
Reinforcing carbon fibers assist maintain real, consistent pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props need balancing, this is ESSENTIAL, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 11" Pitch: 6
Density at hub: 1/2" Hole diameter: 1/4"

COMMENTS:
The "C2" represent the production run in which this prop was made.

Get this thing to boost the one you read about.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered airplane only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with two adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One direction sheet

NEEDS:
Assembly onto motor or equipment drive system in your Electric plane.
Balancing

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Center inner diameter: 0.25"

COMMENTS:
Use Speed 400 Electric motors.